|
|
Dynamic Recrystallization Behavior and Microstructure Evolution of AISI 304N Stainless Steel |
WANG Chang-jun,FENG Han,ZHENG Wen-jie,SONG Zhi-gang,YONG Qi-long |
Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract Dynamic recrystallization of 304N stainless steel was investigated at deformation temperatures of 900-1300 �� and strain rates of 0��01-10 s-1 by a Gleeble-1500 thermo-mechanical simulator. And the microstructure evolutions of specimens with different deformation temperatures were observed by using a transmission electron microscope. Results indicated that compared with conventional AISI 304 austenitic stainless steel, 304N stainless steel has higher deformation resistance force and deformation activation energy under similar conditions. In addition, the flow stress constitutive equation of 304N stainless steel was obtained by regression analysis of experimental stress-strain data, and the calculated values proposed by the mathematical model agree well with the experimental results.
|
Received: 29 May 2012
Published: 14 October 2013
|
Fund:High Technology Research and Development Program of China (863 Program) |
Corresponding Authors:
Chang-Jun WANG
E-mail: dajun198451@163.com
|
|
|
|
[1] |
FAN Ming- qiang,,MAO Lei,,ZHANG Yun- fei,TIAN Zhi- qiang,SUN Zhong- hua,QIN Sen. Effects of temperature rise on deformation behavior and microstructure of H13 steel during high temperature compression process[J]. Chinese Journal of Iron and Steel, 2017, 29(9): 756-761. |
[2] |
ZHANG Shi-wei������YANG Ming������LIANG Yi-long������JIANG Yun����LONG Shao-lei����. Constitutive equations and dynamic recrystallization behaviors of 20CrNi2Mo steel at stage of high temperature deformation[J]. Chinese Journal of Iron and Steel, 2017, 52(8): 97-105. |
[3] |
GONG Qian-jiang��������LIANG Yi-long������ ��YANG Ming��������JIANG Yun��������XU Xiang������. Phenomenological constitutive model and dynamic recrystallization behavior of 20CrMnTiH steel[J]. Chinese Journal of Iron and Steel, 2017, 52(6): 67-75. |
[4] |
LIANG Jian-xiong��YONG Qi-long��ZHANG Liang��WANG Chang-jun. Hot deformation behavior and its processing map of 1Cr17Ni1 duplex stainless steel[J]. Chinese Journal of Iron and Steel, 2016, 51(9): 82-89. |
[5] |
WANG Ya-fen��DU Hong-zhi��ZHAO Guang-dong. Discussion of high strain rate test based on collision performance of steel for automobile[J]. Chinese Journal of Iron and Steel, 2016, 34(6): 24-27. |
[6] |
YU Hui��LIU Li-gang��WANG Xiu-lin��HUANG Hong-tao��FENG Qing. Cooling phase transformation and numerical simulation of nuclear steel P280GH[J]. Chinese Journal of Iron and Steel, 2016, 51(12): 58-64. |
|
|
|
|