|
|
Multi-Wedge Cross Rolling of Balls |
Zbigniew Pater |
Mechanical Faculty, Lublin University of Technology, Lublin 20-618, Lublin, Poland |
|
|
Abstract The multi-wedge cross rolling process of forming balls is described. The process tool for rolling 8 balls with a diameter of 35 mm is presented. The course of the rolling process, distributions of forming forces as well as maps of effective strain and temperature in the obtained balls are presented by finite element modeling (FEM). Experimental tests of simultaneous forming of 4 balls with a diameter of 22 mm conducted in laboratory conditions at Lublin University of Technology have proved that the balls obtained in multi-wedge cross rolling are of good quality and can therefore be used in both ball mills and rolling bearings.
|
Received: 08 May 2012
Published: 14 October 2013
|
|
|
|
[1] |
SUN Jian-liang�� QIU Chou-wu�� PENG Yan�� DONG Zhi-kui�� CHANG Rong-wei. Combined electromagnetic and thermal FEM modeling of heavy cylinder during induction heating process[J]. Chinese Journal of Iron and Steel, 2016, 51(11): 93-96. |
[2] |
Yong-jiang ZHENG,Guang-xian SHEN,Yi-geng LI,Ming LI,Hong-min LIU. Spatial Vibration and Its Numerical Analytical Method of Four-high Rolling Mills[J]. Chinese Journal of Iron and Steel, 2014, 21(9): 837-843. |
[3] |
Hua-gui HUANG,Yong LIU,Feng-shan DU,Lei CHEN. Void Closure Behavior in Large Diameter Steel Rod during H-V Rolling Process[J]. Chinese Journal of Iron and Steel, 2014, 21(3): 287-294. |
[4] |
G Banaszek,S Berski,H Dyja,A Kawa�bek. Theoretical Modelling of Metallurgical Defect Closing-Up Processes During Forming a Forging[J]. Chinese Journal of Iron and Steel, 2013, 20(9): 111-116. |
[5] |
Mr��z Sebastian. Influence of Non-Uniform Temperature Distribution on Metallic Charge Length on Energy and Force Parameters During Groove-Rolling[J]. Chinese Journal of Iron and Steel, 2012, 19(8): 17-24. |
[6] |
WANG Tao,XIAO Hong,ZHAO Tie-yong,QI Xiang-dong. Improvement of 3-D FEM Coupled Model on Strip Crown in Hot Rolling[J]. Chinese Journal of Iron and Steel, 2012, 19(3): 14-19. |
|
|
|
|