|
|
Experimental and Numerical Study on Determination of Forces During Cold Rolling of Shafts |
Kowalik Marek1,Trzepieci��ski Tomasz2 |
1. Institute of Mechanical Engineering, Technical University of Radom, Radom 26600, Poland 2. Department of Material Forming and Processing, Rzeszow University of Technology, Rzesz��w 35959, Poland |
|
|
Abstract The influence of stress and friction conditions on material flow during longitudinal cold rolling of a shaft was investigated. The longitudinal cold rolling method makes it possible to form and finish-up machine parts in the rolling process, which is associated with strengthening of the material due to cold work. The experiments were carried out in order to determine the pressure force at the stage of squeezing on shafts formed by longitudinal cold rolling and made of constructional unalloyed steels S235JR and C45. The experimental results were compared with numerical simulation results obtained by using the MSC��Marc 2010 based on finite element method (FEM). The influence of deformation degree on structural changes and the increase of material strength are shown.
|
Received: 20 April 2012
Published: 14 October 2013
|
|
|
|
[1] |
Yan��jun ZHOU,,Ke��xing SONG,,Jian��dong XING,Zhou LI,Xiu��hua GUO,. Mechanical Properties and Fracture Behavior of Cu��Co��Be Alloy after Plastic Deformation and Heat Treatment[J]. Chinese Journal of Iron and Steel, 2016, 23(9): 933-939. |
[2] |
Zhi-xin XIA,Chuan-yang WANG,Chen LEI,Yun-ting LAI,Yan-fen ZHAO,Lu ZHANG. Growth Kinetics of Laves Phase and Its Effect on Creep Rupture Behavior in 9Cr Heat Resistant Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(7): 685-691. |
[3] |
Bo YAN,,Si-hai JIAO,Dian-hua ZHANG. Microstructure and Mechanical Properties of Semi-continuous Equal-channel Angular Extruded Interstitial-free Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(2): 160-165. |
[4] |
Chao SUN,Shan-wu YANG,Rui ZHANG,Xian WANG,Hui GUO. Influence of Plastic Deformation on Thermal Stability of Low Carbon Bainitic Steel[J]. Chinese Journal of Iron and Steel, 2015, 22(1): 60-66. |
[5] |
YU Hai-yan. Microscopic Response of TRIP Steels to Prestrain During Plastic Deformation[J]. Chinese Journal of Iron and Steel, 2013, 20(9): 80-85. |
[6] |
Gennadii V Snizhnoi,Mariya S Rasshchupkyna,. Magnetic State of Deformed Austenite Before and After Martensite Nucleation in Austenitic Stainless Steels[J]. Chinese Journal of Iron and Steel, 2012, 19(6): 42-46. |
|
|
|
|