|
|
|
| Residual Curvature of Longitudinal Profile Plate Roller in Leveling Process |
| CUI Li1,SHI Quan-qiang2,LIU Xiang-hua3,HU Xian-lei3 |
1. Aviation Industry Corporation of China Shenyang Aircraft Corporation, Shenyang 110034, Liaoning, China
2. Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, Liaoning, China
3. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, Liaoning, China |
|
|
|
|
Abstract Roller leveling process of longitudinal profile (LP) plate is hardly studied because plate thickness changes. Deformation characteristics and residual curvature during LP plate leveling process were investigated based on curvature integral by elastic-plastic differences. It was found that entry intermesh section is reduced with increasing thickness and entry intermesh should be from 0��7 to 1��1 mm for LP plate with 42/54 mm in thickness. In order to get satisfactory flatness along longitudinal direction, small entry intermesh should be selected and exit intermesh should be 0 mm. In addition, thickness section for LP plate which can be leveled by 11 roller leveler is from 24 to 60 mm. Finally, there is an intermesh schedule that could level LP plate with initial curvature less than elastic limit curvature.
|
|
Received: 12 June 2012
Published: 14 October 2013
|
| Fund:National Natural Science Foundation of China |
|
Corresponding Authors:
li CUI
E-mail: cuilitianda@163.com
|
|
|
|
| [1] |
Juan-juan Liu,Qing Wang,,*,Kang Sun,Sebastien Gravier,Jean-jacque Blandin,Bao-an Sun, Jian Lu. Serrated plastic flow behavior and microstructure in a Zr-based bulk metallic glass processed by surface mechanical attrition treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(4): 475-482. |
| [2] |
Yong-qin WANG,Zhi-fang LIU,Hen-gan OU,Yuan-xin LUO,Xing-chun YAN. Curvature and Residual Stress Analysis in Rotational Leveling of Bars[J]. Chinese Journal of Iron and Steel, 2016, 23(7): 669-676. |
| [3] |
Shui-ze WANG,,Yong-lin KANG,Guo-ming ZHU,Wen LIANG. Influence of Residual Stress on Shape of Heavy-gauge, High-strength Steel Caused by Cooling Process after Hot Rolling[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 547-552. |
| [4] |
SONG Guang��sheng;LIU Xiang��hua;WANG Guo��dong;XU Xiang��qiu. Numerical Simulation on Carburizing and Quenching of Gear Ring[J]. Chinese Journal of Iron and Steel, 2007, 14(6): 47-0. |
| [5] |
LI Sheng��zhi;YIN Yuan��de;XU Jie;HOU Jun��ming;Jaehong YOON. Numerical Simulation of Continuous Tension Leveling Process of Thin Strip Steel and Its Application[J]. Chinese Journal of Iron and Steel, 2007, 14(6): 8-0. |
| [6] |
CHE Lei;GOTOH Masahide;HORIMOTO Yoshiaki;HIROSE Yukio. Effect of Microstructure of Cementite on Interphase Stress State in Carbon Steel[J]. Chinese Journal of Iron and Steel, 2007, 14(4): 31-0. |
|
|
|
|
2013, Vol. 20 
