|
|
|
| Modeling Flow Stress of 70Cr3Mo Steel Used for Back-Up Roll During Hot Deformation Considering Strain Compensation |
| REN Fa-cai,CHEN Jun |
| Department of Plasticity Technology, Shanghai Jiao Tong University, Shanghai 200030, China |
|
|
|
|
Abstract A constitutive model incorporating the influence of strain developed based on the Arrhenius equation by considering the variation of material constants as a fifth polynomial function of strain is presented. Materials constants are fit to data from hot compression tests of 70Cr3Mo steel used for back-up roll at the temperatures from 1173 to 1473 K and strain rates from 0. 01 to 10 s-1 by using a Gleeble-1500D thermo-mechanical simulator. The developed constitutive model is then used to predict the flow stress under all the tested conditions. The statistical parameters of correlation coefficient and average absolute relative error are used to analyze the predictable efficiency and the values are 0. 997 and 3. 64%, respectively. The results show a good agreement between experimental stress and predicted stress.
|
|
Received: 10 July 2012
Published: 18 November 2013
|
| Fund:National Natural Science Foundation of China;The National Key Fundamental Research Project |
|
|
|
| [1] |
ZHANG Shi-wei������YANG Ming������LIANG Yi-long������JIANG Yun����LONG Shao-lei����. Constitutive equations and dynamic recrystallization behaviors of 20CrNi2Mo steel at stage of high temperature deformation[J]. Chinese Journal of Iron and Steel, 2017, 52(8): 97-105. |
| [2] |
YU Wu-gang��QIU Xiao-pan��ZHANG Jie��JIANG She-ming��YANG Hui-yu��ZHANG Qi-fu. Influence of pre-alloying time on zinc-based coatings of hot forming steel in structure and component[J]. Chinese Journal of Iron and Steel, 2017, 52(7): 84-88. |
| [3] |
LI Shu-li��WANG Cun-yu��WANG Yu-tian��CHANG Ying��DONG Han. Warm stamping of medium-Mn steel[J]. Chinese Journal of Iron and Steel, 2016, 28(11): 46-50. |
| [4] |
HUI Wei-jun,ZHANG Yong-jian,WU Zhen-yu,SHI Zhou-long,DONG Han. Spot Welding Property of Si-Mn Type Ultrahigh Strength Hot Stamping Quenched Steel Sheet[J]. Chinese Journal of Iron and Steel, 2012, 24(09): 51-55. |
| [5] |
WANG Jin;CHEN Jun;ZHAO Zhen;RUAN Xue��yu. Hot Deformation Behavior of F40MnV Steel Without Quenching��and��Tempering[J]. Chinese Journal of Iron and Steel, 2007, 19(5): 68-0. |
| [6] |
LI Xiang;XU Zhang��ze;AN Tao;LI Sheng��zhi;YAN Jun. Hot Forming Technology of Railway Wheel With Thin Rim Width and Deep Dish[J]. Chinese Journal of Iron and Steel, 2007, 19(11): 40-0. |
|
|
|
|
2013, Vol. 20 
