|
|
|
| Flow Behavior and Numerical Simulation of Spray-Formed FGH95 Superalloy Under Hot Compression |
| GUO Biao1,GE Chang-chun1,2,XU Yi1 |
1. School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, Sichuan,China
2. Institute of Special Ceramics and Powder Metallurgy, School of Materials Science and Engineering,University of Science and Technology Beijing, Beijing 100083, China |
|
|
|
|
Abstract The flow behavior of spray-formed FGH95 superalloy (similar to Rene 95) was investigated at temperatures ranging from 1050 to 1140 �� and strain rate ranging from 0��01 to 10 s-1. At a given temperature and strain rate, flow stress increases quickly with increasing strain and then reaches a peak, then gradual decreases until high strain, and dynamic softening is observed. Utilizing the hyperbolic sine function and introducing the strain with nonlinear fitting, the revised constitutive equations incorporating the effects of temperature, strain rate and strain for high temperature flow stress prediction of superalloy were established. The revised constitutive equations were implanted into finite element software by second development to simulate the hot compression process successfully, and the effective stress and load stroke curves obtained by numerical simulation are good agreement with the experimental results.
|
|
Received: 28 September 2012
Published: 17 December 2013
|
| Fund:Projects Sponsored by the National Natural Science Foundation of China |
|
Corresponding Authors:
Biao GUO
E-mail: biaoguo_mse@126.com
|
|
|
|
| [1] |
ZHANG Shi-wei������YANG Ming������LIANG Yi-long������JIANG Yun����LONG Shao-lei����. Constitutive equations and dynamic recrystallization behaviors of 20CrNi2Mo steel at stage of high temperature deformation[J]. Chinese Journal of Iron and Steel, 2017, 52(8): 97-105. |
| [2] |
GONG Qian-jiang��������LIANG Yi-long������ ��YANG Ming��������JIANG Yun��������XU Xiang������. Phenomenological constitutive model and dynamic recrystallization behavior of 20CrMnTiH steel[J]. Chinese Journal of Iron and Steel, 2017, 52(6): 67-75. |
| [3] |
SHI Jing-rui��QIU Bao-wen����YUAN Ze-xi��SHEN Dong-dong. Void-cell model and numerical analysis of evolution regular of void in X80 steel[J]. Chinese Journal of Iron and Steel, 2017, 52(1): 47-52. |
| [4] |
XIAO Hong����REN Zhong-kai����LIU Xiao����YU Chao����GU Yong-fei. Experiment and finite element simulation of roll flattening in deformation zone for ultra-thin strip rolling[J]. Chinese Journal of Iron and Steel, 2017, 52(1): 38-42. |
| [5] |
ZHU Zhi-ming,,CHAI Feng,LIANG Feng-rui,SU Hang,XU Zhao-chen,LU Xiao-gang. Temperature field simulation and optimization of low alloy-steel involved induction hardening[J]. Chinese Journal of Iron and Steel, 2017, 29(1): 75-80. |
| [6] |
LIANG Jian-xiong��YONG Qi-long��ZHANG Liang��WANG Chang-jun. Hot deformation behavior and its processing map of 1Cr17Ni1 duplex stainless steel[J]. Chinese Journal of Iron and Steel, 2016, 51(9): 82-89. |
|
|
|
|
2013, Vol. 20 
