|
|
Optimization of BF Slag for High Cr2O3 Vanadium-titanium Magnetite |
Yong ZHANG,Jue TANG,Man-sheng CHU,Yang LIU,Shuang-yin CHEN,Xiang-xin XUE |
School of Material and Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China |
|
|
Abstract In order to clarify the slag system of high Cr2O3 vanadium-titanium magnetite smelting in BF (blast furnace), the melting properties of slag samples prepared by analytically pure reagents were measured. By means of orthogonal test synthetic weighted score method, the optimal slag for high Cr2O3 vanadium-titanium magnetite was obtained, which contained 10% MgO, 8% TiO2 and 15% Al2O3, with the binary basicity being 1��15. In addition, the effects of basicity, MgO, TiO2 and Al2O3 on slag melting properties were investigated by single factor test, and the results showed that, with increasing the basicity or TiO2 content, melting temperature (Tm) increased, whereas initial viscosity (��0) and high-temperature viscosity (��h) decreased. With increasing the MgO content, Tm decreased firstly and then increased. With increasing the Al2O3 content, Tm increased, and ��0 and ��h decreased firstly and then increased.
|
Received: 13 September 2012
Published: 20 February 2014
|
Fund:National Natural Science Foundation of China Major Program;the National High Technology Research and Development Program of China 863 Program;the National High Technology Research and Development Program of China 863 Program;Fundamental Research Funds for the Central Universities |
Corresponding Authors:
Jue TANG
E-mail: juetang@126.com
|
|
|
|
|
|
|