|
|
Tribological Properties of CrN Coated H13 Grade Tool Steel |
Erdem Atar1,�Dzg��r Alpaslan2,3,�Dzg��r �selik3,H��seyin �simeno��lu3 |
1. Department of Materials Science and Engineering, Gebze Institute of Technology, Gebze 41400, Kocaeli, Turkey 2. Small and Medium Sized Enterprises Development Organization, Istanbul 34776, Turkey 3. Metallurgical and Materials Engineering Department, Istanbul Technical University, Istanbul 34469, Turkey |
|
|
Abstract The characteristics of CrN coated martensitic H13 grade tool steels were studied. CrN coatings were deposited by the arc physical vapor deposition (PVD) before and after the pulse plasma nitriding of the samples. The PVD and plasma nitriding techniques were applied in relevant workshops by following the commercial practice parameters. Experimental results showed that CrN coating deposited on the nitrided surfaces exhibited superior scratch and wear resistances as compared to that deposited on the original martensitic surface.
|
Received: 02 August 2012
Published: 20 February 2014
|
|
|
|
[1] |
Zhen Cao,Shu-qi Wang*,Ke-zhi Huang,Bo Zhang,Guo-hong Wen,Qiu-yang Zhang,Lan Wang. Effect of artificial tribological layer on sliding wear behavior of H13 steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 943-949. |
[2] |
YIN Cun-hong��LIANG Yi-long. Friction induced wear and martensite deformation behavior of 20CrNi2Mo steel[J]. Chinese Journal of Iron and Steel, 2017, 52(8): 81-86. |
[3] |
ZHANG Shi-wei������YANG Ming������LIANG Yi-long������JIANG Yun����LONG Shao-lei����. Constitutive equations and dynamic recrystallization behaviors of 20CrNi2Mo steel at stage of high temperature deformation[J]. Chinese Journal of Iron and Steel, 2017, 52(8): 97-105. |
[4] |
Luis Daniel Aguilera Camacho,Santos Garc��a Miranda,Karla Judith Moreno. Tribological performance of uncoated and TiCN-coated D2, M2 and M4 steels under lubricated condition[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 823-829. |
[5] |
Jun-feng Zhao,Shan-guang Liu,Xiao-guang Yuan,*,Jian-fei Sun,**,Hong-jun Huang, Fu-yang Cao,Hong-xian Shen,Yu-long Wang. Effect of Al22Si/ZL102 bimetal interface fabricated by extrusion at near-eutectic temperature[J]. Chinese Journal of Iron and Steel, 2017, 24(4): 469-474. |
[6] |
Nan-nan Zhang,*,Dan-yang Lin,Ya-li Li,Yue Zhang,Marie-pierre Planche,Han-lin Liao, Christian Coddet,Fu-yu Dong. In-flight particle characterization and coating formation under low pressure plasma spray condition[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 306-312. |
|
|
|
|