|
|
Hot Deformation Behavior of Ni3Al-based Alloy MX246A |
Jian-tao WANG,Wei HAN,He-li LUO,Shang-ping LI |
Central Iron and Steel Research Institute Group, Beijing 100081, China |
|
|
Abstract The hot deformation behavior of homogenized Ni3Al-based alloy MX246A has been characterized on the basis of its flow stress variation obtained by isothermal constant true strain rate compression testing on the MTS 810 machine in the temperature range of 1150-1225 �� and strain rate range of 0��001-0��1 s-1. Microstructural observation revealed striped secondary �á� phase which was vertical to compression axis, and precipitation of fine ternary �á� phase. The amount of striped secondary �á� phase reduced and that of fine ternary �á� phase increased with increasing temperature and decreasing strain rate. The material exhibited peak stress followed by flow softening, but no obvious steady-state flow behavior. Microstructural investigations have shown no dynamic recrystallization happened. TEM studies indicated that the flow softening was controlled by dynamic recovery mechanism.
|
Received: 19 October 2012
Published: 20 February 2014
|
|
|
|
[1] |
Yang Yun,Qing-wu Cai,,Bao-sheng Xie,*,Shuang Li. Effect of tempering temperature on strain hardening exponent and flow stress curve of 1000 MPa grade steel for construction machinery[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 950-956. |
[2] |
Yuan-ji Shi,Lan-ji Liu,Lei Zhang,Li-jun Zhang,Li Zheng,Run-xia Li,Bao-yi Yu*. Effect of squeeze casting process on microstructures and flow stress behavior of Al-17.5Si-4Cu-0.5Mg alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 957-965. |
[3] |
Zhao-xia Shi,,*,Xiao-feng Yan,Chun-hua Duan,Jin-gui Song,Ming-han Zhao,Jue Wang. Hot deformation behavior of GH4945 superalloy using constitutive equation and processing map[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 625-633. |
[4] |
Da-shan Sui,*,Hai-ming Zhang,Hong-yang Zhu,Zhe Zhu,Zhen-shan Cui. Effects of process parameters on fragment and refinement of millimeter-grade coarse grains for 316LN steel during hot cogging[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 529-535. |
[5] |
Lei Wang,Di Tang*,Yong Song. Prediction of mechanical behavior of ferrite-pearlite steel[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 321-327. |
[6] |
Peng Zhou,,Qing-xian Ma,,*. Static recrystallization behavior of 25CrMo4 mirror plate steel during two-pass hot deformation[J]. Chinese Journal of Iron and Steel, 2017, 24(2): 222-228. |
|
|
|
|