|
|
Analysis of Hot Tandem Rolling Force with Logarithmic Velocity Field and EA Yield Criterion |
Jian-zhao CAO,De-wen ZHAO,Shun-hu ZHANG,Wen PENG,Shu-zong CHEN,Dian-hua ZHANG |
State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, Liaoning, China |
|
|
Abstract In order to analyze the hot tandem rolling force, a new logarithmic velocity field is proposed. Using the field and linear EA (equal area) yield criterion, the plastic deformation power for plate rolling is analyzed, and the friction power is obtained based on the co-line vector inner product method. Then analytical solution of plate rolling power functional is obtained. Finally, by minimizing the power functional, the rolling force and torque are received. Compared with those measured ones in hot tandem rolling on-line, the calculated rolling forces are in good agreement with the actual measured ones since the maximum error is less than 12%. Moreover, the effects of various rolling conditions such as thickness reduction, friction factor and shape factor, upon separating force, location of neutral angle, and stress state coefficient are discussed systematically.
|
Received: 22 January 2013
Published: 19 March 2014
|
Fund:Projects Sponsored by the National Natural Science Foundation of China;Projects Sponsored by the National Natural Science Foundation of China |
Corresponding Authors:
Jian-zhao CAO
E-mail: 13709824030@163.com
|
|
|
|
[1] |
LI Wei-gang����FENG Ning��WANG Shen-de��YAN Bao-kang. Research and development of deformation desistance model for phase transformation process of hot-rolled strips[J]. Chinese Journal of Iron and Steel, 2017, 52(6): 61-66. |
[2] |
LI Wei-gang,,LIU Chao,BIAN Hao,LIU Xiang-hua. Optimization calculation strategy of load distribution for hot strip mills[J]. Chinese Journal of Iron and Steel, 2017, 29(5): 391-396. |
[3] |
LING Qi-hui��ZHAO Qian-cheng��WANG Xian��YAN Xiao-qiang��ZHANG Qing-dong. Hydraulic-mechanical coupling system dynamics modeling and vibration characteristics of hot strip tandem mill[J]. Chinese Journal of Iron and Steel, 2017, 52(2): 51-58. |
[4] |
WANG Jian-gong��ZHAO Hu��XIA Yin-feng��ZHOU Xun��KANG Yong-lin��QIU Chen-yang. Development and application of ferrite rolling to Ti-IF steel in hot continuous rolling line[J]. Chinese Journal of Iron and Steel, 2017, 52(10): 65-71. |
[5] |
CHEN Jun����LI Ji-guang��TANG Guang-bo. Discussion on mathematical simulation of grooveless rolling process based on induction heating[J]. Chinese Journal of Iron and Steel, 2016, 34(3): 11-15. |
[6] |
SUN Jian-liang��PENG Yan��ZHANG Yong-zhen��CHEN Su-wen��HAN Hui. Prediction model of hot rolling force in heavy cylinder rolling[J]. Chinese Journal of Iron and Steel, 2015, 50(9): 64-70. |
|
|
|
|