|
|
|
| Microstructure and Mechanical Properties of TRIP Steel with Annealed Martensite |
| Wei DING1,2,Zhi-hua GONG1,Bao-feng WANG1,Di TANG2,Hai-tao JIANG2 |
1. School of Material and Metallurgy, Inner Mongolia University of Science and Technology, Baotou 014010,Inner Mongolia, China
2. National Engineering Research Center for Advanced Rolling Technology,University of Science and Technology Beijing, Beijing 100083, China |
|
|
|
|
Abstract The microstructure and mechanical properties of cold rolled TRIP steel containing C 0. 2, Si 0. 5, Mn 1. 5, Al 1. 3, and Nb+V 0. 13 (mass%) with annealed martensite (TAM steel) were investigated using optical microscopy, field emission gun scanning electronic microscope (FEG SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and mechanical testing. The microstructure of the TAM steel mainly consisted of polygonal ferrite, bainite, annealed martensite and retained austenite. The martensite after annealing did not spheroidize, which consisted of annealed lath martensite structure and interlath second phase. Compared with the traditional TRIP steel with polygonal ferrite matrix (TPF steel), the TAM steel has more excellent elongation rate over 32%. The TAM steel also has better strain hardening behavior than the TPF steel. The excellent elongation and strain hardening behavior of TAM steel result from high retained austenite stability of the TAM steel, which is attributed to its fine distribution and medium strength ratio of second phase to matrix.
|
|
Received: 30 November 2012
Published: 14 May 2014
|
|
Corresponding Authors:
Wei
E-mail: adingwei@126.com
|
|
|
|
| [1] |
ZHAO Gui- heng,LIU Yong- qing,ZHANG Hong- ping. New development of giant magnetostrictive materials[J]. Chinese Journal of Iron and Steel, 2017, 29(9): 689-696. |
| [2] |
YU Hui��ZHAI Jian-wei��ZHANG Chao-fan��LIU Shuai-shuai��LIU Li-gang. Microstructures and properties of nuclear carbon manganese steels P280GH after accelerated aging[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 66-72. |
| [3] |
YANG Ting,SU Hang,LUO Xiao-bing,CHAI Feng,ZHANG Zheng-yan. Cross section microstructure and homogeneity of mechanical properties of as quenched high strength ship steel[J]. Chinese Journal of Iron and Steel, 2017, 29(7): 583-589. |
| [4] |
LIU Chun-quan,,PENG Qi-chun,,DENG Ming-ming��XU Jing-bo,LI Wei,PENG Sheng-tang. Research situation of Mn-Al medium manganese steel for 3rd generation automobile sheet[J]. Chinese Journal of Iron and Steel, 2017, 29(6): 431-440. |
| [5] |
CHEN Lian-sheng,HU Bao-jia,TIAN Ya-qiang,DONG Fu-tao,LI Hong-bin,WEI Ying-li. Effect of intercritical region deformation on Cu partitioning, microstructure and mechanical properties of a Cu bearing low carbon steel[J]. Chinese Journal of Iron and Steel, 2017, 29(6): 488-493. |
| [6] |
TIAN Ya-qiang,ZHANG Ming-shan,DONG Fu-tao,LI Hong-bin,WEI Ying-li,CHEN Lian-sheng. Granular bainite microstructure evolution and mechanical properties of low carbon steel in quenching isothermal carbon partition process[J]. Chinese Journal of Iron and Steel, 2017, 29(5): 420-424. |
|
|
|
|
2014, Vol. 21 
