|
|
Effect of Ti on Austenite Grain Growth Behavior in High Carbon Steels |
Han MA,Shu-lun LIAO,Shi-fang WANG |
Institute of Research of Iron and Steel, Shasteel, Zhangjiagang 215625, Jiangsu, China |
|
|
Abstract Austenite grain growth behavior of two high carbon steels was observed using Confocal Laser Scanning Microscope (CLSM). Apparent austenite grain sizes for different holding time under a series of temperatures were measured by employing linear intercept method. Experimental results showed that Ti-bearing steel exhibited a much sluggish growth rate compared with Ti-free counterpart, which was attributed to the pinning effect of Ti(C,N) nanoparticles with the size of 20 to 40 nm on austenite grain boundaries. Based on the research conducted by using Transmission Electron Microscope (TEM) observation and Thermo-Calc calculation, Ti(C,N) was confirmed to be the dominant phase at elevated temperature. Some models were introduced to predict the grain sizes of both steels. By comparison, the results predicted by the modified Gladman equation are found to be closest to the experimental results, which could be employed to predict accurately the austenite grain growth of high carbon steels.
|
Received: 08 July 2013
Published: 08 July 2014
|
Fund:Project guided by science and technology in Inner Mongolia Autonomous Region |
Corresponding Authors:
Shu-lun LIAO
E-mail: liaoshulun@163.com
|
|
|
|
[1] |
Qi-long Yong,,*,Zheng-yan Zhang,Xin-jun Sun,Jian-chun Cao,Zhao-dong Li. Effect of dissolved niobium on eutectoid transformation behavior[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 973-980. |
[2] |
Xiao-li Zhao,,Yong-jian Zhang,Cheng-wei Shao,Wei-jun Hui,Han Dong. Thermal stability of retained austenite and mechanical properties of medium-Mn steel during tempering treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 830-837. |
[3] |
Liang Yang,,Bryan A. Webler,Guo-guang Cheng. Precipitation behavior of titanium nitride on a primary inclusion particle during solidification of bearing steel[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 685-690. |
[4] |
Jian-guo Chen,Yong-chang Liu,Chen-xi Liu,Bi-yu Yan,Hui-jun Li. Effects of tantalum on austenitic transformation kinetics of RAFM steel[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 705-710. |
[5] |
Ze-an Lv,,Hong-wei Ni,,*,Hua Zhang,,Cheng-song Liu,,**. Evolution of MnS inclusions in Ti-bearing X80 pipeline steel[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 654-660. |
[6] |
Shi-feng Liu,,*,An Li,Yao-jia Ren,Dong-feng Li,Zhao-hui Zhang. Heat transfer performance of porous titanium[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 556-560. |
|
|
|
|