|
|
Mathematical Modeling of Carbon Content and Intercritical Annealing Temperature in DP Steels by Factorial Design Method |
Gulcan TOKTAS1,Alaaddin TOKTAS1,Aslan Deniz KARAOGLAN2 |
1. Department of Mechanical Engineering, Balikesir University, Balikesir 10145, Turkey 2. Department of Industrial Engineering, Balikesir University, Balikesir 10145, Turkey |
|
|
Abstract 2k factorial design is employed to find the mathematical relation between the carbon content and intercritical annealing temperature (IAT) in order to predict the responses namely martensite volume fraction (MVF), microhardness (H), yield strength (YS), ultimate tensile strength (UTS), total elongation (TEL), yield ratio (YR) and Charpy impact energy (CIE) in dual phase (DP) steels. Steels containing different carbon contents (0.085% C and 0.380% C) had been chosen for this purpose. The main advantages of factorial design are its easy implementation and the effective computation compared with the other optimization techniques, which were employed for predicting mentioned responses in the literature. To verify the proposed approach based on factorial design, experiments for verification were performed. The results of the verification experiments and the mathematical models are in accordance with each other and the literature.
|
Received: 30 January 2013
Published: 08 July 2014
|
|
|
|
[1] |
Rui-bin Gou,,,Wen-jiao Dan,,Wei-gang Zhang,,Min Yu,*,Chun-yu Zhang,Yin-hu Qiao, Lu Ma. Microstructure failure in ferrite-martensite dual phase steel under in-situ tensile test[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 350-356. |
[2] |
Bing FU,,Hai-jun WANG,Jian-xin YAN,,Li XIANG,Sheng-tao QIU,Guo-guang CHENG. Effects of Temperature and Alloying Elements on �� Phase Fraction of Grain-oriented Silicon Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 573-579. |
[3] |
Jae-gil JUNG,Seok-jae LEE. Prediction of Nitrogen Diffusivity in ��-ferrite Based on Thermodynamics[J]. Chinese Journal of Iron and Steel, 2015, 22(8): 743-745. |
[4] |
Wen PENG,Zi-ying LIU,Xi-lin YANG,Jian-zhao CAO,Dian-hua ZHANG. Optimization of Temperature and Force Adaptation Algorithm in Hot Strip Mill[J]. Chinese Journal of Iron and Steel, 2014, 21(3): 300-305. |
[5] |
Fei HE,,Dong-feng HE,,An-jun XU,,Hong-bing WANG,Nai-yuan TIAN,. Hybrid Model of Molten Steel Temperature Prediction Based on Ladle Heat Status and Artificial Neural Network[J]. Chinese Journal of Iron and Steel, 2014, 21(2): 181-190. |
[6] |
Le-yu ZHOU,Bo JIANG,Tian-hao CUI,Dan ZHANG,Jian-zhong HE,Ya-zheng LIU. Effect of Strengthening Phase on Deformation Behaviour during Uniaxial Tension of Hot-rolled Dual Phase Steel[J]. Chinese Journal of Iron and Steel, 2014, 21(12): 1111-1115. |
|
|
|
|