|
|
Microstructure Evolution and Mechanical Properties of HR3C Steel during Long-term Aging at High Temperature |
Bin WANG1,2,Zheng-dong LIU1,Shi-chang CHENG1,Chun-ming LIU1,Jing-zhong WANG1 |
1. Institute of Structural Materials, China Iron and Steel Research Institute Group, Beijing 100081, China 2. School of Materials and Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China |
|
|
Abstract Microstructure evolution and the changes in mechanical properties of HR3C steel during long-term aging at 650, 700 and 750 �� were investigated. The precipitated phases of the aging steel included M23C6 carbides, Z-phase and a trace amount of Nb(C,N). The M23C6 carbides were distributed mainly at the grain boundary, while Z-phase was mainly inside the grains. Amounts of both M23C6 carbides and Z-phase during the aging process increased with increasing aging period and temperature. Coarsening of M23C6 carbides was influenced significantly by aging time and temperature, while the size of the Z-phase was relatively less affected by the aging time and temperature, which had a steady strengthening effect. Coarsening of the M23C6 carbides was the main reason for the decline in high temperature yield strength during long-term aging at 750 ��. The M23C6 carbides were linked into a continuous chain along the grain boundary which accounted for the decrease of toughness during aging.
|
Received: 29 March 2013
Published: 01 August 2014
|
Corresponding Authors:
Bin WANG
E-mail: binking2012@foxmail.com
|
|
|
|
[1] |
Xu Yang,,Bo Liao,Fu-ren Xiao,Wei Yan,Yi-yin Shan,Ke Yang. Ripening behavior of M23C6 carbides in P92 steel during aging at 800��C[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 858-864. |
[2] |
Yong-xing Jiao,Jian-sheng Liu*,Xing-wang Duan,Xiao-hua Zheng,Wen-wu He. Prediction of critical forging penetration efficiency for 06Cr19Ni9NbN steel by dynamic recrystallization[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 649-653. |
[3] |
Zhong-liang Tian,,Sen-bao Jiang,Zheng-zong Chen,Han-sheng Bao,Zheng-dong Liu,*. Microstructural evolution and mechanical properties of a new Ni-based heat-resistant alloy during aging at 750��C[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 513-519. |
[4] |
Da-shan Sui,*,Hai-ming Zhang,Hong-yang Zhu,Zhe Zhu,Zhen-shan Cui. Effects of process parameters on fragment and refinement of millimeter-grade coarse grains for 316LN steel during hot cogging[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 529-535. |
[5] |
Wu- hua YUAN,Xue- hui GONG,,Yong- qing SUN,Jian- xiong LIANG. Microstructure Evolution and Precipitation Behavior of 0Cr16Ni5Mo Martensitic Stainless Steel during Tempering Process[J]. Chinese Journal of Iron and Steel, 2016, 23(4): 401-408. |
[6] |
Nancy M. LOPEZ GRANADOS,Armando SALINAS RODRIGUEZ. EBSD Investigation on Effect of Cooling Rate on Microstructure and Transformation Textures of High Strength Hot-rolled Steel Plates[J]. Chinese Journal of Iron and Steel, 2016, 23(3): 261-269. |
|
|
|
|