|
|
Metallurgical Studies of Austenitic Stainless Steel 304 under Warm Deep Drawing |
Jayahari Lade1,Balu Naik Banoth2,Amit Kumar Gupta3,Swadesh Kumar Singh1 |
1. Department of Mechanical Engineering, GRIET, Bachupally, Hyderabad 500090, Telangana, India 2. Department of Mechanical Engineering, JNTUH, Hyderabad 500085, Telangana, India 3. Mechanical Engineering Department, BITS-Pilani, Hyderabad Campus, Hyderabad 500078, Telangana, India |
|
|
Abstract Austenitic stainless steel 304 was deep drawn with different blank diameters under warm conditions using 20 t hydraulic press. A number of deep drawing experiments both at room temperature and at 150 �� were conducted to study the metallography. Also, tensile test experiments were conducted on a universal testing machine up to 700 �� and the broken specimens were used to study the fractography of the material using scanning electron microscopy in various regions. The microstructure changes were observed at limiting draw ratio (LDR) when the cup is drawn at different temperatures. In austenitic stainless steel, martensite formation takes place that is not only affected by temperature, but also influenced by the rate at which the material is deformed. In austenitic stainless steel 304, dynamic strain regime appears above 300 �� and it decreases the formability of material due to brittle fracture as studied in its fractography. From the metallographic studies, the maximum LDR of the material is observed at 150 �� before dynamic strain regime. It is also observed that at 150 ��, grains are coarse in the drawn cups at LDR.
|
Received: 29 September 2013
Published: 04 December 2014
|
|
|
|
[1] |
Ying Ci,*,Zhan-zhan Zhang. Simulation study on heat-affected zone of high-strain X80 pipeline steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 966-973. |
[2] |
Xiao-li Zhao,,Yong-jian Zhang,Cheng-wei Shao,Wei-jun Hui,Han Dong. Thermal stability of retained austenite and mechanical properties of medium-Mn steel during tempering treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 830-837. |
[3] |
Hang-wei Zhou,,Hui-qun Liu,,Dan-qing Yi,,Yu Xiao,,Xiao-long Zhao,Jian Wang,Qi Gao. Effect of �� phase on fatigue crack growth of Ti-6242 alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 811-822. |
[4] |
Zhi-gang Song,En-xiang Pu,. Precipitated phases of superaustenitic stainless steel 654SMO[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 743-749. |
[5] |
Jia-long Tian,,Wei Wang,,Wei Yan,,Zhou-hua Jiang,Yi-yin Shan,,Ke Yang. Microstructure characteristics of segregation zone in 17-4PH stainless steel piston rod[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 718-723. |
[6] |
Reng-chong Xu,,Yan-lin He,,Hu Jiang,,Hua Wang,,Na-qiong Zhu,,Xiao-gang Lu,, Lin Li,. Microstructures and mechanical properties of ferrite-based lightweight steel with different compositions[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 737-742. |
|
|
|
|