|
|
Effect of Solute Elements and Cooling Rate on Strain in Brittle Temperature Range of Continuously Cast Strand |
Hui ZHANG1,Yi FAN1,2,Ming-lin WANG1,Hong-biao TAO1 |
1. National Engineering Research Center of Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing 100081, China 2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract A micro-segregation model of solute elements in mushy zone with ��/�� transformation during solidification was established based on the regular hexagon transverse cross section of dendrite shape proposed by finite difference method under the non-equilibrium solidification condition. The model was used to calculate the non-equilibrium pseudo binary Fe-C phase diagram and the strain of steels induced by variation of temperature in brittle temperature range. On the basis of the phase diagram and the strain, the strain curve in brittle temperature range as a function of carbon content for continuously cast strand was introduced and obtained. Solute elements change the position of the strain curve. And cooling rate changes the position and the shape of the strain curve. The comprehensive formula of the strain as functions of solute elements and cooling rate in brittle temperature range has been obtained by nonlinear fitting program.
|
Received: 30 August 2013
Published: 06 March 2015
|
Corresponding Authors:
Yi Fan
E-mail: fy378992760@163.com
|
|
|
|
[1] |
Zhu-jun Jiang,Yu-ye Wu,,Jing-min Wang,Cheng-bao Jiang. Influence of cooling rate on magneto-structural transition and magnetocaloric effect of Ni30Cu8Co12Mn37Ga13 alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 711-717. |
[2] |
Xue-feng ZHOU,Wang-long ZHU,Hong-bing JIANG,Feng FANG,Yi-you TU,Jian-qing JIANG. A New Approach for Refining Carbide Dimensions in M42 Super Hard High-speed Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(8): 800-807. |
[3] |
Lian-yun JIANG,Chun-jiang ZHAO,Jian-hui SHI,Guo YUAN,Xue-qiang WANG,Qing-xue HUANG. Hot Rolled Strip Re-reddening Temperature Changing Law during Ultra-fast Cooling[J]. Chinese Journal of Iron and Steel, 2015, 22(8): 694-702. |
[4] |
Guang-ming CAO, Teng-zhi WU, Rong XU, Zhi-feng LI, Fu-xiang WANG, Zhen-yu LIU. Effects of Coiling Temperature and Cooling Condition on Transformation Behavior of Tertiary Oxide Scale[J]. Chinese Journal of Iron and Steel, 2015, 22(10): 892-896. |
[5] |
Hai-bo SUN,Jia-quan ZHANG. Effect of Actual Cooling Rate of Ladle Stream on Persistent Metallurgical Performance of a Given Tundish[J]. Chinese Journal of Iron and Steel, 2014, 21(10): 915-922. |
[6] |
WANG Chao,WANG Zhao-dong,YUAN Guo,WANG Dao-yuan,WU Jun-ping,WANG Guo-dong. Heat Transfer During Quenching by Plate Roller Quenching Machine[J]. Chinese Journal of Iron and Steel, 2013, 20(5): 1-05. |
|
|
|
|