|
|
A Novel Low-cost Hot Rolled High Strength Steel for an Automatic Teller Machine |
Bin ZENG1,2,Zhao-dong LI2,Xin-jun SUN2,Qi-long YONG2,Yu-qing WENG2 |
1. Technical Center, Lianyuan Iron and Steel Co., Ltd., Loudi 417009, Hunan, China 2. Department of Structural Steels, Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract A novel hot rolled steel LG600A with the tensile strength exceeding 700 MPa was developed for automatic teller machine application. The low-cost C-Mn steel was microalloyed with 0.08 mass%-0.12 mass% Ti rather than noble alloying elements, such as Nb, V, Mo, and Cu, etc. The novel steel had a good surface quality and welding property. After the hot rolled steel coils were leveled, the steel plates, the length of which was even down to 1500 mm, had an excellent flatness. The effects of hot rolling parameters on mechanical performance, microstructure and recrystallization behavior were studied. The metallurgical concept for the steel production was also discussed. The result shows that decreasing the finish rolling temperature, increasing cooling rate in the first cooling stage and decreasing the cooling rate in the last cooling stage, together with coiling at a modestly high coiling temperature all resulted in the refined grains and TiC precipitates, thereby improving the strength and toughness of this new steel greatly.
|
Received: 05 December 2013
Published: 06 March 2015
|
|
|
|
[1] |
Ying Ci,*,Zhan-zhan Zhang. Simulation study on heat-affected zone of high-strain X80 pipeline steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 966-973. |
[2] |
Xiao-li Zhao,,Yong-jian Zhang,Cheng-wei Shao,Wei-jun Hui,Han Dong. Thermal stability of retained austenite and mechanical properties of medium-Mn steel during tempering treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 830-837. |
[3] |
Hang-wei Zhou,,Hui-qun Liu,,Dan-qing Yi,,Yu Xiao,,Xiao-long Zhao,Jian Wang,Qi Gao. Effect of �� phase on fatigue crack growth of Ti-6242 alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 811-822. |
[4] |
Qiu-lin Niu,,Wei-wei Ming,Ming Chen,Si-wen Tang,,Peng-nan Li,. Dynamic mechanical behavior of ultra-high strength steel 30CrMnSiNi2A at high strain rates and elevated temperatures[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 724-729. |
[5] |
Reng-chong Xu,,Yan-lin He,,Hu Jiang,,Hua Wang,,Na-qiong Zhu,,Xiao-gang Lu,, Lin Li,. Microstructures and mechanical properties of ferrite-based lightweight steel with different compositions[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 737-742. |
[6] |
Wei-jun Hui,*,Na Xiao,Xiao-li Zhao,Yong-jian Zhang,Yu-feng Wu. Effect of vanadium on dynamic continuous cooling transformation behavior of medium-carbon forging steels[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 641-648. |
|
|
|
|