|
|
|
| Velocity Preset and Transitional Zone��s Shape Optimization for Tailor Rolled Blank |
| Dong-cheng WANG1,2,Lian-chao DONG1,Hong-min LIU1,2,Yan WANG1 |
1. National Engineering Research Center for Equipment and Technology of Cold Rolling Strip, Yanshan University,Qinhuangdao 066004, Hebei, China
2. State Key Laboratory of Metastable Materials Science and Technology,Yanshan University, Qinhuangdao 066004, Hebei, China |
|
|
|
|
Abstract Tailor rolled blank (TRB) is a type of emerging material to produce lightweight vehicle parts. Transitional zone��s shape is an important parameter for tailor rolled blank. It not only affects mold design and the local carrying capacity of the stamping parts, but also determines the maximum value and variation characteristics of rolling force. How to get the best transitional zone��s shape is a key problem for production of tailor rolled blank. A double power function is put forward using for transitional curve, which is continuous and smooth at all connection points independent of its parameters, so the sudden change of mechanical parameters during rolling and forming process can be avoided. At the same time, the velocity formula and restriction for arbitrary transitional curve are derived to preset vertical velocity of the roller and judge whether the curve can be rolled successfully or not. Then, the finite element method (FEM) is used to verify the precision of velocity formula and study the mechanical characteristics of different curves. Finally, a method to obtain the optimal curve equation is put forward and verified.
|
|
Received: 23 December 2013
Published: 13 April 2015
|
| Fund:National Science and Technology Support Program of China;Natural Science Foundation of Hebei Province |
|
Corresponding Authors:
Wang Dong-cheng
E-mail: wdc-731@163.com
|
|
|
|
| [1] |
LI Jun��ZHANG Ling-ling��ZHAO Gui-zhou��CANG Da-qiang. Pilot practice of direct modification of molten blast furnace slag and preparation of mineral wool fiber[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 99-103. |
| [2] |
XU Ren-ze��ZHANG Jian-liang��ZHANG He-shun��LIU Chang-jiang�� FAN Xiao-yue��WANG Zhi-yu. Influence of TiO2 on properties of Jingtang blast furnace slag and thermodynamic analysis[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 104-108. |
| [3] |
JIANG Zhou-hua��ZHANG Xin-fa��LIU Fu-bin��GONG Wei. Harmful impurities control of raw material used in Ni-based superalloy production[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 1-10. |
| [4] |
SONG Guang-yi��YANG Quan��WANG Xiao-chen��ZHANG Xi-bang�� WANG Feng-mei��WANG Qiu-na. Work roll wear law for hot strip temper mill[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 54-59. |
| [5] |
WANG Bing-xing��XIONG Lei��ZHANG Tian��WANG Zhao-dong��WANG Guo-dong. Influence on deformation permeability of plate by controlled rolling process with inter-pass water cooling technology[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 60-65. |
| [6] |
YU Hui��ZHAI Jian-wei��ZHANG Chao-fan��LIU Shuai-shuai��LIU Li-gang. Microstructures and properties of nuclear carbon manganese steels P280GH after accelerated aging[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 66-72. |
|
|
|
|
2015, Vol. 22 
