|
|
Numerical Simulation of Electromagnetic Field and Flow Pattern in a Continuous Slab Caster with In-roll Type Strand Electromagnetic Stirring |
Jian GONG1,2,He-ping LIU3,Xian-hui WANG2,Yan-ping BAO1 |
1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing,Beijing 100083, China 2. Shougang Qian��an Iron & Steel Company, Qian��an 064404, Hebei, China 3. Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract The electromagnetic field and flow analysis model were developed to simulate the electromagnetic field and the flow pattern in a vertical curved continuous slab caster with the in-roll type strand electromagnetic stirring. The transient electromagnetic field distribution and the induced electromagnetic force were numerically described. The effects of stirring current, stirring frequency, and different stirrer configurations on the electromagnetically driven flow field in the strand were investigated and the optimization of the stirring parameters was discussed by performing a relative comparison of numerical results. Results show that the in-roller type strand electromagnetic stirrer (S-EMS) pair generates the fluctuating magnetic fields, penetrating through the cast slab and periodically parallel shifting along the slab wide face with time evolution. The transient induced electromagnetic forces travels toward the magnetic flux shifting direction. Different stirring parameters (i.e. current and frequency) and stirrer configurations affect the stirring strength and the flow recirculation pattern in the strand, which are closely related to metallurgical performances of the stirrers. There is an optimum frequency to obtain the maximum stirring. The present model provides a relatively theoretical insight into the in-roll type strand electromagnetic stirring system for best operating.
|
Received: 27 June 2014
Published: 07 May 2015
|
Corresponding Authors:
Liu He-ping
E-mail: liuhp07@gmail.com
|
|
|
|
[1] |
Zhong Zheng,*,Jian-yu Long,Xiao-qiang Gao. Production scheduling problems of steelmaking-continuous casting process in dynamic production environment[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 586-594. |
[2] |
Long Guo,Xing-zhong Zhang*,Chang-xi Feng. Continuous bending and straightening technology of Q345c slab based on high-temperature creep deformation[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 595-600. |
[3] |
Bang-fu Huang,,*,Nai-yuan Tian,Zhe Shi,,Zhi-wei Ma,. Steel ladle exchange models during steelmaking and continuous casting process[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 617-624. |
[4] |
Yu Xu,,En-gang Wang,,*,Zhuang Li,,An-yuan Deng,. Effects of vertical electromagnetic stirring on grain refinement and macrosegregation control of bearing steel billet in continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 483-489. |
[5] |
Chao Zhou,,Xing-zhong Zhang,*,Fang Wang,Ping-fei Liu,Yi-ming Fang. Mechanism analysis of non-sinusoidal oscillation of continuous casting mold synchronously driven by double servomotors[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 251-257. |
[6] |
Yang Liu,Xin-hua Liu*,Hua-dong Fu,Min-xuan Lou,Jian-xin Xie. Effects of process parameters on surface quality, composition segregation, microstructure and properties of QSn6.5-0.1 alloy slabs fabricated by HCCM horizontal continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 273-281. |
|
|
|
|