|
|
Formation of Hearth Sediment during Vanadium Titano-magnetite Smelting in Blast Furnace No.7 of Chengde Iron and Steel Company |
Xiao-jie LIU1, Qing L��1,2, Shu-jun CHEN3, Zhen-feng ZHANG3, Shu-hui ZHANG2, Yan-qin SUN2 |
1. School of Materials and Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China 2. College of Metallurgy and Energy, Hebei Key Laboratory for Advanced Metallurgy Technology, North China University of Science and Technology, Tangshan 063009, Hebei, China 3. Chengde Branch, Hebei Iron and Steel Group Co., Ltd., Chengde 067002, Hebei, China |
|
|
Abstract The large quantity of sediment produced in the hearth during vanadium titano-magnetite smelting in a blast furnace (BF) affects the stability of the blast furnace operation. Testing and analysis of the sediment in the hearth of Chengde Iron and Steel Company.s BF No.7 revealed that it was mainly concentrated in the location below the tuyere and above the iron notch. Notably, some of the bonding material (sediment) consisted of greater than 50% pig iron, and the pig iron distributed in the slag was granular. It is proposed that a large quantity of TiC and Ti(C,N) are deposited on the surface of the pig iron. These high melting point materials mix with iron drops, preventing the slag from flowing freely, thus leading to the formation of bonding materials. In addition, the viscosity and melting temperature of the slag in the tuyere areas fluctuate greatly, and thus the properties of the slag are unstable. Moreover, the slag contains large quantities of carbon, which results in the reduction of TiO2. The resultant precipitation of Ti is followed by the formation of TiC in the slag, which also leads to an increase in the viscosity of the slag and difficulty in achieving separation of the slag-iron. In fact, all of these factors interact with each other, and as a result, sediment is formed when the operating conditions in the hearth fluctuate.
|
Received: 28 September 2014
Published: 09 November 2015
|
Corresponding Authors:
��
E-mail: xiaojie19851003@163.com
|
|
|
|
[1] |
Hai-yan Tang*,Yong Wang,Guang-hui Wu,Peng Lan,Jia-quan Zhang. Inclusion evolution in 50CrVA spring steel by optimization of refining slag[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 879-887. |
[2] |
H. Gonzalez,J.A. Ramos-Banderas,E. Torres-Alonso,G. Solorio-Diaz,C.A. Hern��ndez-Bocanegra,. Multiphase modeling of fluid dynamic in ladle steel operations under non-isothermal conditions[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 888-900. |
[3] |
Wei Wu,*,Shi-fan Dai,Yue Liu. Dephosphorization stability of hot metal by double slag operation in basic oxygen furnace[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 908-915. |
[4] |
Yu-bao Liu,,Zhi-hong Zhang,,Er-xiong Zhao,,Xian-heng Zhang,,Xiao-qing Wang,, Guo-hua Chen,. Niobium and phosphorus behavior during melting-separation process of pre-reduced niobium ore concentrate[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 691-696. |
[5] |
Wan-ming Li,Zhou-hua Jiang,,*,Xi-min Zang,Xin Deng. Modeling of flow and temperature distribution in electroslag remelting withdrawal process for fabricating large-scale slab ingots[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 569-578. |
[6] |
Rui Wang,Yan-ping Bao,*,Yi-hong Li,Tai-quan Li,Di Chen. Effect of slag composition on steel cleanliness in interstitial-free steel[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 579-585. |
|
|
|
|