|
|
Influence of Screw Design on Burden Descending Velocity and Particle Segregation in COREX Shaft Furnace |
Hai-feng LI1,Heng ZHOU1,Tao ZHANG1,Yang YOU1,Zong-shu ZOU1,Wan-ren XU2 |
1. School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China 2. Baoshan Iron and Steel Co., Ltd., Shanghai 201900, China |
|
|
Abstract COREX shaft furnace (SF) is an industrial system that employs screw feeders; thus, the burden descending velocity and particle segregation in the SF can be directly affected by the design of screw. A three-dimensional actual size model of COREX-3000 SF was established using the discrete element method. Four types of burdens, including pellet, ore, flux and coke, were considered in this model. With this consideration, the effect of screw design on solid flow was investigated. Results showed that, in the base case, burdens fell primarily down from the first flight of the screw. The burden descending velocities were nearly uniform in the peripheral direction and decreased along the radial direction. In addition, the normalized particle size increased in the center area and decreased in the wall area. Reducing the flight diameter of screw benefited an even flow pattern and restrained the rolling tendency of burden from the edge to center areas. An optimized case was also proposed, in which a uniform solid flow profile could be obtained and the evenness of descending velocity along the radius could be greatly improved.
|
Received: 15 May 2015
Published: 12 June 2016
|
Fund:the National Key Technology R&D Program during the ��12th Five-Year Plan�� of China;the National Natural Science Foundation of China |
Corresponding Authors:
Heng ZHOU
E-mail: zhouheng1566@126.com
|
|
|
|
[1] |
Zi-long Qiu,Zhi-guo Luo,*,Heng Zhou,Ren Chen,Feng Wang,Zong-shu Zou. Effect of screw casing structure on descending of burdens in COREX shaft furnace[J]. Chinese Journal of Iron and Steel, 2017, 24(1): 18-26. |
[2] |
Li-hao HAN,Zhi-guo LUO,Heng ZHOU,Zong-shu ZOU,Yu-zhu ZHANG,. Influence of Cohesive Zone Shape on Solid Flow in COREX Melter Gasifier by Discrete Element Method[J]. Chinese Journal of Iron and Steel, 2015, 22(4): 304-310. |
[3] |
Jin-shan CHEN, Chang-sheng LI. Prediction and Control of Thermal Scratch Defect on Surface of Strip in Tandem Cold Rolling[J]. Chinese Journal of Iron and Steel, 2015, 22(2): 106-114. |
[4] |
Zhi��guo LUO,,Heng ZHOU,,Tao ZHANG,,Yang YOU,,Hai��feng LI,,Zong��shu ZOU,. DEM Simulation of Solid Flow Including Asymmetric Phenomena in COREX Shaft Furnace[J]. Chinese Journal of Iron and Steel, 2015, 22(12): 1098-1106. |
[5] |
Xin ZHANG,Shu-zong CHEN,Hao-yu ZHANG,Xi-wen ZHANG,Dian-hua ZHANG,Jie SUN. Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill[J]. Chinese Journal of Iron and Steel, 2014, 21(9): 830-836. |
[6] |
Jian-zhao CAO,De-wen ZHAO,Shun-hu ZHANG,Wen PENG,Shu-zong CHEN,Dian-hua ZHANG. Analysis of Hot Tandem Rolling Force with Logarithmic Velocity Field and EA Yield Criterion[J]. Chinese Journal of Iron and Steel, 2014, 21(3): 295-299. |
|
|
|
|