|
|
Microstructure and Wear Properties of Fe-based Amorphous Coatings Deposited by High-velocity Oxygen Fuel Spraying |
Gang WANG1,Ping XIAO1,Zhong-jia HUANG1,Ru-jie HE2 |
1. Remanufacturing Surface Engineering Technology Research Center, Anhui Polytechnic University, Wuhu 241000,Anhui, China 2. Institute of Advanced Structure Technology, Beijing Institute of Technology, Beijing 100081, China |
|
|
Abstract Fe-based powder with a composition of Fe42��87Cr15��98Mo16��33C15��94B8��88 (at��%) was used to fabricate coatings by high-velocity oxygen fuel spraying. The effects of the spraying parameters on the microstructure and the wear properties of the Fe-based alloy coatings were systematically studied. The results showed that the obtained Fe-based coatings with a thickness of about 400 ��m consisted of a large-volume amorphous phase and some nanocrystals. With increasing the fuel and oxygen flow rates, the porosity of the obtained coatings decreased. The coating deposited under optimized parameters exhibited the lowest porosity of 2��8%. The excellent wear resistance of this coating was attributed to the properties of the amorphous matrix and the presence of nanocrystals homogeneously distributed within the matrix. The wear mechanism of the coatings was discussed on the basis of observations of the worn surfaces.
|
Received: 17 July 2015
Published: 01 July 2016
|
Fund:National Natural Science Foundation of China;Key Project of Natural Science of Education Department of Anhui Province |
|
|
|
[1] |
Luis Daniel Aguilera Camacho,Santos Garc��a Miranda,Karla Judith Moreno. Tribological performance of uncoated and TiCN-coated D2, M2 and M4 steels under lubricated condition[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 823-829. |
[2] |
Jun Tan,*,Jun-yan Gao,Xue-mei Qin,Zheng-rong Fu,Dong Li,Min Li,Xiu-chang Wang, Gang Wang. Fractography and morphology of shear bands of a Zr-based bulk metallic glass[J]. Chinese Journal of Iron and Steel, 2017, 24(4): 385-389. |
[3] |
Jun-feng Zhao,Shan-guang Liu,Xiao-guang Yuan,*,Jian-fei Sun,**,Hong-jun Huang, Fu-yang Cao,Hong-xian Shen,Yu-long Wang. Effect of Al22Si/ZL102 bimetal interface fabricated by extrusion at near-eutectic temperature[J]. Chinese Journal of Iron and Steel, 2017, 24(4): 469-474. |
[4] |
Nan-nan Zhang,*,Dan-yang Lin,Ya-li Li,Yue Zhang,Marie-pierre Planche,Han-lin Liao, Christian Coddet,Fu-yu Dong. In-flight particle characterization and coating formation under low pressure plasma spray condition[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 306-312. |
[5] |
Dan-yang Lin,Nan-nan Zhang,*,Bin He,Guang-wei Zhang,,Yue Zhang,De-yuan Li. Tribological properties of FeCoCrNiAlBx high-entropy alloys coating prepared by laser cladding[J]. Chinese Journal of Iron and Steel, 2017, 24(2): 184-189. |
[6] |
Hai-feng Xu,,*,Feng Yu,Chang Wang,Wan-li Zhang,Jian Li,Wen-quan Cao. Comparison of microstructure and property of high chromium bearing steel with and without nitrogen addition[J]. Chinese Journal of Iron and Steel, 2017, 24(2): 206-213. |
|
|
|
|