|
|
Effects of Thermal Gradients and Rotational Flows on Grain Growth in 22 t Steel Ingots |
Zheng CHEN1,2,Qi��jie ZHAI1,Jie��yu ZHANG1,Hong��gang ZHONG1 |
1. State Key Laboratory of Advanced Special Steel, School of Materials Science and Engineering, Shanghai University,Shanghai 200072, China 2. Mechanical Department, Tongling University, Tongling 244000, Anhui, China |
|
|
Abstract Heavy ingots are widely used in many industrial fields. The coarse grains formed during the process of ingot solidification influence the properties and fracture behaviors of the final products. The coarse grain growth was simulated under different thermal gradients. A 30Cr2Ni4MoV steel ingot was melted in a cubic crucible with dimensions of 15 cm��10 cm��23 cm, and the cooling conditions on each side of the crucible were controlled by different thermal curves. The influences of thermal gradients and rotational flows on grain growth in heavy steel ingots were then investigated both numerically and experimentally. The results showed that when the amplitude of the rotation angle was 60��, the metal was solidified under a reciprocating horizontal rotational condition when the angular velocity was 10 (��)/s or 20 (��)/s. As the thermal gradient increased, the lengths of the primary columnar grains increased, and the diameters of equiaxed grains decreased. When the direction of flow rotation was perpendicular to the direction of grain growth, the columnar grain zone was nearly eliminated, and the average diameter of equiaxed grains was 0��5 mm.
|
Received: 23 December 2015
Published: 02 September 2016
|
Fund:the National Basic Research Program of China(973 program) |
|
|
|
[1] |
Yu Xu,,En-gang Wang,,*,Zhuang Li,,An-yuan Deng,. Effects of vertical electromagnetic stirring on grain refinement and macrosegregation control of bearing steel billet in continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 483-489. |
[2] |
Gen LIANG,,Chen SHI,,Ya-jun ZHOU,,Da-heng MAO,. Numerical Simulation and Experimental Study of an Ultrasonic Waveguide for Ultrasonic Casting of 35CrMo Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(8): 772-777. |
[3] |
Xiang-dong HUO,Lie-jun LI,Zheng-wu PENG,Song-jun CHEN. Effects of TMCP Schedule on Precipitation, Microstructure and Properties of Ti-microalloyed High Strength Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 593-601. |
[4] |
Jia-tao ZHANG,Yu-guang ZHAO,Juan TAN,Xiao-feng XU. Austenite Grain Refinement by Reverse ������� Transformation in Metastable Austenitic Manganese Steel[J]. Chinese Journal of Iron and Steel, 2015, 22(2): 157-162. |
[5] |
Geng-wei YANG,,,Xin-jun SUN,Qi-long YONG,Zhao-dong LI,Xiao-xian LI,. Austenite Grain Refinement and Isothermal Growth Behavior in a Low Carbon Vanadium Microalloyed Steel[J]. Chinese Journal of Iron and Steel, 2014, 21(8): 757-764. |
[6] |
Yu-guang ZHAO,Jia-tao ZHANG,Juan TAN,Bing-dong MA. Microstructure Refinement and Property Improvement of Metastable Austenitic Manganese Steel Induced by Electropulsing[J]. Chinese Journal of Iron and Steel, 2014, 21(7): 685-689. |
|
|
|
|