|
|
|
| Three-dimensional Numerical Simulation and Experimental Analysis of Austenite Grain Growth Behavior in Hot Forging Processes of 300M Steel Large Components |
| Jiao LUO,Ying-gang LIU,Miao-quan LI |
| School of Materials Science and Engineering, Northwestern Polytechnical University, Xi��an 710072, Shaanxi, China |
|
|
|
|
Abstract The microstructure models were integrated into finite element (FE) code, and a three-dimensional (3D) FE analysis on the entire hot forging processes of 300M steel large components was performed to predict the distributions of effective strain, temperature field and austenite grain size. The simulated results show that the finest grains distribute in the maximum effective strain region because large strain induces the occurrence of dynamic recrystallization. However, coarse macro-grains appear in the minimum effective strain region. Then, 300M steel forging test was performed to validate the results of FE simulation, and microstructure observations and quantitative analysis were implemented. The average relative difference between the calculated and experimental austenite grain size is 7.56%, implying that the present microstructure models are reasonable and can be used to analyze the hot forging processes of 300M steel.
|
|
Received: 24 November 2015
Published: 18 October 2016
|
| Fund:the National Natural Science Foundation of China;the Innovation Fund of Science and Technology in Northwestern Polytechnical University |
|
|
|
| [1] |
Zong-ye Ding,Di Zhang,Qiao-dan Hu,,*,Long Zeng,Jian-guo Li,. Constitutive analysis and optimization on hot working parameters of as-cast high Cr ultra-super-critical rotor steel with columnar grains[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 916-924. |
| [2] |
Yong-xing Jiao,Jian-sheng Liu*,Xing-wang Duan,Xiao-hua Zheng,Wen-wu He. Prediction of critical forging penetration efficiency for 06Cr19Ni9NbN steel by dynamic recrystallization[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 649-653. |
| [3] |
Hai-feng Xu,,*,Feng Yu,Chang Wang,Wan-li Zhang,Jian Li,Wen-quan Cao. Comparison of microstructure and property of high chromium bearing steel with and without nitrogen addition[J]. Chinese Journal of Iron and Steel, 2017, 24(2): 206-213. |
| [4] |
Rong-sheng QI,Miao JIN,Xin-gang LIU,Bao-feng GUO. Formation Mechanism of Inclusion Defects in Large Forged Pieces[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 531-538. |
| [5] |
Gan- lin XIE,An HE,Hai- long ZHANG,Gen- qi WANG,Xi- tao WANG. A Physically Based Dynamic Recrystallization Model Considering Orientation Effects for a Nitrogen Alloyed Ultralow Carbon Stainless Steel during Hot Forging[J]. Chinese Journal of Iron and Steel, 2016, 23(4): 364-371. |
| [6] |
Xin-gang LIU,Li-ge ZHANG,Rong-sheng QI,Lei CHEN,Miao JIN,Bao-feng GUO. Prediction of Critical Conditions for Dynamic Recrystallization in 316LN Austenitic Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(3): 238-243. |
|
|
|
|
2016, Vol. 23 
