|
|
|
| Recycling of High Ferrous Bauxite Reducing Slag for Synthesis of CaAl2Si2O8-Al2O3-CaAl12O19 Composite |
| Ying-yi ZHANG1,2,Yuan-hong QI2,Zong-shu ZOU3 |
1. College of Materials Science and Engineering, Chongqing University, Chongqing 400030, China
2. State Key Laboratory of Advanced Steel Processes and Products, Central Iron and Steel Research Institute, Beijing 100081,China
3. School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China |
|
|
|
|
Abstract CaAl2Si2O8-Al2O3-CaAl12O19 (CAS2-Al2O3-CA6) composite was synthesized through reaction sintering alumina and bauxite reducing slag. The CAS2-Al2O3-CA6 composite was mainly composed of ��-Al2O3, CAS2, and CA6. Gehlenite (Ca2Al2SiO7, C2AS) phase was effectively transformed to CAS2 and CA6 through high-temperature reaction sintering under weak oxidizing atmosphere at 1400 �� for 4 h. SEM (scanning electron microscopy) and EDS (energy dispersive spectroscopy) analysis indicated that black and needle-shaped Al2O3, rhombic or irregular polygonal-shaped FeAl2O4, and glassy phase Ca2Al2SiO7 disappeared after the reaction sintering. The light gray and flaky hexagon crystals of CaAl12O19 (10 ��m) and the grainy particles of Al2O3 (2-7 ��m) were observed in the CAS2-Al2O3-CA6 composite. The gray crystals of CAS2 act as the binding phase and are distributed around CA6 and Al2O3. CAS2-Al2O3-CA6 composite exhibits high refractoriness and service temperature, which are 1650 �� and 1450 ��, respectively. Reaction sintering of alumina and bauxite reducing slag is a feasible method for the synthesis of CAS2-Al2O3-CA6 composite.
|
|
Received: 20 January 2016
Published: 15 December 2016
|
| Fund:Sino-australian International Scientific and Technological Cooperation and Exchange Projects |
|
Corresponding Authors:
Ying-Yi yizhang
E-mail: zhangyingyi@cqu.edu.cn
|
|
|
|
| [1] |
Yuan-dong Pei,,,Sheng-li Wu,,Shao-guo Chen,Zhi-xing Zhao,Gang An,Zheng-ming Cheng, Yao-sheng Luo. Sintering of solid waste generated in iron and steel manufacturing process in Shougang Jingtang[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 697-704. |
| [2] |
Shi-feng Liu,,*,An Li,Yao-jia Ren,Dong-feng Li,Zhao-hui Zhang. Heat transfer performance of porous titanium[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 556-560. |
| [3] |
Wen-juan Ge,Xu-ting Li,Peng Li,Peng-chao Qiao,Jian-wei Du,Shuai Xu,Yan Wang*. Microstructures and properties of CuZrAl and CuZrAlTi medium entropy alloys prepared by mechanical alloying and spark plasma sintering[J]. Chinese Journal of Iron and Steel, 2017, 24(4): 448-454. |
| [4] |
Shan Ren*,Fu-qiang Guo,Qi Zhao,Jie Yang,Lu Yao,Ming Kong. Sintering flue gas desulfurization with different carbon materials modified by microwave irradiation[J]. Chinese Journal of Iron and Steel, 2017, 24(10): 979-984. |
| [5] |
Xin-sheng Wang,Zhen-lin Lu*,Lei Jia,Jiang-xian Chen. Preparation of porous titanium materials by powder sintering process and use of space holder technique[J]. Chinese Journal of Iron and Steel, 2017, 24(1): 97-102. |
| [6] |
Hua Zhang,Yan-xin Wu,Jian-xun Fu*,Jie Xu,Qi-jie Zhai. Influence of on-line tempering parameters on microstructure of medium-carbon steel[J]. Chinese Journal of Iron and Steel, 2017, 24(1): 59-66. |
|
|
|
|
2016, Vol. 23 
