|
|
Mechanism analysis of non-sinusoidal oscillation of continuous casting mold synchronously driven by double servomotors |
Chao Zhou1,2,Xing-zhong Zhang1,*,Fang Wang3,Ping-fei Liu1,Yi-ming Fang1 |
1 National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, Hebei, China 2 Hebei Agricultural University, Qinhuangdao 066003, Hebei, China 3 School of Science, Yanshan University, Qinhuangdao 066004, Hebei, China |
|
|
Abstract Due to the disadvantages of complexity, high maintenance and vast investment of the electro-hydraulic servo oscillator, a new mechanical device synchronously driven by double servomotors was proposed. The working principle of the non-sinusoidal oscillator was analyzed and the model of the oscillator was validated via simulation software. Then, taking advantage of resonance technology, the hinging force and moment were calculated. The results showed that the hinging force and driving moment reduced, which was useful in reducing the impact of the hinge and prolonging the service life of the bearing. Besides, the best initial spring pressure was 0.9 times the mold gravity, which improved the oscillation system stability and reduced the load fluctuation and servomotor driving power.
|
Received: 24 June 2016
Published: 20 March 2017
|
Fund:������Ȼ��ѧ����;������Ȼ��ѧ����;�ӱ�ʡ��Ȼ��ѧ����;�ӱ�ʡ������ѧ��Ա������Ŀ |
Corresponding Authors:
Xing-ZHong ZHANG
E-mail: zhangxzh@ysu.edu.cn
|
|
|
|
[1] |
Zhong Zheng,*,Jian-yu Long,Xiao-qiang Gao. Production scheduling problems of steelmaking-continuous casting process in dynamic production environment[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 586-594. |
[2] |
Long Guo,Xing-zhong Zhang*,Chang-xi Feng. Continuous bending and straightening technology of Q345c slab based on high-temperature creep deformation[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 595-600. |
[3] |
Bang-fu Huang,,*,Nai-yuan Tian,Zhe Shi,,Zhi-wei Ma,. Steel ladle exchange models during steelmaking and continuous casting process[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 617-624. |
[4] |
Yu Xu,,En-gang Wang,,*,Zhuang Li,,An-yuan Deng,. Effects of vertical electromagnetic stirring on grain refinement and macrosegregation control of bearing steel billet in continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 483-489. |
[5] |
Yang Liu,Xin-hua Liu*,Hua-dong Fu,Min-xuan Lou,Jian-xin Xie. Effects of process parameters on surface quality, composition segregation, microstructure and properties of QSn6.5-0.1 alloy slabs fabricated by HCCM horizontal continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 273-281. |
[6] |
Yonghui PARK,Hyunchul PARK. Dynamic Response of Mold Oscillator Interacting with Steel Slabs[J]. Chinese Journal of Iron and Steel, 2016, 23(9): 900-909. |
|
|
|
|