|
|
|
| Microstructural evolution and mechanical properties of a new Ni-based heat-resistant alloy during aging at 750��C |
| Zhong-liang Tian1,2,Sen-bao Jiang1,Zheng-zong Chen1,Han-sheng Bao1,Zheng-dong Liu1,* |
1 Institute for Special Steels, Central Iron and Steel Research Institute, Beijing 100081, China
2 College of Material Science & Engineering, Taiyuan Science & Technology University, Taiyuan 030024, Shanxi, China |
|
|
|
|
Abstract Microstructural evolution and mechanical properties of a new candidate Ni-based heat-resistant alloy for advanced ultra-supercritical (A-USC) steam turbine rotors were investigated during aging at 750��C up to 10000 h. The evolutions of �á� particles inside austenitic grain and M23C6 carbides along grain boundaries were characterized according to their morphologies, distributions, and growth kinetics. Mean radius of the �á� spherical particles grew from 20��3 to 90��0 nm after aging for 10000 h, and the corresponding coarsening behavior was conformed to the law of Lifschitz-Slyosovd-Wagner (LSW). The weight fraction of �á� particles slightly increased from 10��0 to 12��0 wt��% after aging of long duration at 750��C. The Cr-rich M23C6 carbides discontinuously precipitated along grain boundaries, while other detrimental phases were not formed during the aging treatment, and hence the strength of grain boundary was enhanced by these discontinuously distributed carbides. The critical size of �á� had a direct influence on the maximum hardness of this alloy. Moreover, this alloy presented a good impact toughness for the safety after long time aging at high temperature.
|
|
Received: 27 October 2016
Published: 12 May 2017
|
| Fund:High technology research and development programme of china |
|
Corresponding Authors:
zhong liangtian
E-mail: tian82628@163.com
|
|
|
|
| [1] |
Ying Ci,*,Zhan-zhan Zhang. Simulation study on heat-affected zone of high-strain X80 pipeline steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 966-973. |
| [2] |
Xiao-li Zhao,,Yong-jian Zhang,Cheng-wei Shao,Wei-jun Hui,Han Dong. Thermal stability of retained austenite and mechanical properties of medium-Mn steel during tempering treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 830-837. |
| [3] |
Hang-wei Zhou,,Hui-qun Liu,,Dan-qing Yi,,Yu Xiao,,Xiao-long Zhao,Jian Wang,Qi Gao. Effect of �� phase on fatigue crack growth of Ti-6242 alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 811-822. |
| [4] |
Reng-chong Xu,,Yan-lin He,,Hu Jiang,,Hua Wang,,Na-qiong Zhu,,Xiao-gang Lu,, Lin Li,. Microstructures and mechanical properties of ferrite-based lightweight steel with different compositions[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 737-742. |
| [5] |
Wei-jun Hui,*,Na Xiao,Xiao-li Zhao,Yong-jian Zhang,Yu-feng Wu. Effect of vanadium on dynamic continuous cooling transformation behavior of medium-carbon forging steels[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 641-648. |
| [6] |
Yong-xing Jiao,Jian-sheng Liu*,Xing-wang Duan,Xiao-hua Zheng,Wen-wu He. Prediction of critical forging penetration efficiency for 06Cr19Ni9NbN steel by dynamic recrystallization[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 649-653. |
|
|
|
|
2017, Vol. 24 
