|
|
|
| Crystallization behavior of blast furnace slag modified by adding iron ore tailing |
| Qian-qian Ren1,2,Yu-zhu Zhang1,3,*,Yue Long3,Shao-sheng Chen3,Zong-shu Zou1,Jie Li3, Chen-guang Xu3 |
1 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China
2 State Key Laboratory of Advanced Steel Processes and Products, Central Iron and Steel Research Institute, Beijing 100081, China
3 College of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063009, Hebei, China |
|
|
|
|
Abstract Blast furnace (BF) slag is a by-product of the ironmaking process and could be utilized to manufacture slag fiber by adding iron ore tailing. The crystallization behavior of the modified BF slag is significant to the fibrosis process. To investigate the influence of basicity on the crystallization behavior, BF slag was modified by adding iron ore tailing at room temperature and melted at 1500��C. FactSage simulation, X-ray diffraction, scanning electron microscopy backscattered electron imaging coupled to an energy dispersive spectrometer, and hot thermocouple technique analysis were performed to explore the crystallization behavior of the modified BF slag during the cooling process. It was found that the initial crystallization temperature increased with the increase in basicity. Melilite, anorthite, clinopyroxene, and wollastonite could be generated during the cooling process as basicity ranged from 0.7 to 0.9. Spinel could be found as one of the phases; however, wollastonite disappeared under a basicity of 1.0. The initial crystallization temperature was controlled by the crystallization of melilite during the cooling process when the basicity of the modified BF slag ranged from 0.7 to 1.0. Moreover, the cooling rate could also influence the crystallization of the modified BF slag.
|
|
Received: 08 November 2016
Published: 06 June 2017
|
| Fund:National Natural Science Foundation of China;Science and Technology Hall of Hebei Province Project |
|
|
|
|
|
|
2017, Vol. 24 
