|
|
|
| Effect of surface self-nanocrystallization and Si infiltration on Si diffusion behavior, hardness and magnetic properties of pure Fe |
| Xu Li1 . Yang Li1 . Ying-hui Wei1,2 . Li-feng Hou1 . Bao-sheng Liu2 . Hong-bo Qu1 . Yi-de Wang1 |
1 College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
2 Taiyuan University of Science and Technology, Taiyuan 030024, Shanxi, China |
|
|
|
|
Abstract Surface nanocrystallization of pure Fe was performed using an improved surface treatment process. The phase transfor-mation and Si in.ltration depth of the pure Fe before and after surface mechanical attrition treatment (SMAT) were compared by X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The results indicated that nanocrystallization of Fe surface was achieved using SMAT, which resulted in deeper penetration of Si. Prolonging time of SMAT and Si in.ltration also resulted in increasing microhardness, with the hardness .rst increasing with increasingdistance from the surface and then decreasing. Furthermore, longer Si in.ltration time, nanocrystallization of Si and longer SMAT time resulted in higher saturation magnetization (MS). The greatest Si penetration depth (150 lm), maximum hardness (280 HV), and maximum MS (1.849 9 106 A/m) were achieved after SMAT for 45 min and Si in.ltration for 9 h. The interaction between adjacent grains after surface nanocrystallization leads to a region of the magnetic domain wall structure located at the grain boundary, which causes the remanence enhancement effect.
|
|
Received: 26 June 2017
Published: 05 November 2018
|
|
|
|
| Cite this article: |
|
LI Xu. Effect of surface self-nanocrystallization and Si infiltration on Si diffusion behavior, hardness and magnetic properties of pure Fe[J]. Journal of Iron and Steel Research International, 2018, 25(9): 923-931.
|
|
|
|
| [1] |
X.X. Luo, Z.J. Yao, P.Z. Zhang, Y. Chen, H.Q. Yang, W.U. Xiao-Feng, Z.L. Zhang, Y.H. Lin, X.U. Shang-Jun, Transactions of Nonferrous Metals Society of China, 25 (2015) 3694-3699.
|
| [2] |
J.C. Sun, G.M. Sheng, Y.T. Wang, D.M. Chen, Journal of Functional Materials, 42 (2011) 763-766.
|
| [3] |
T. Balusamy, T.S.N.S. Narayanan, K. Ravichandran, Surface & Coatings Technology, 213 (2012) 221-228.
|
| [4] |
H. Sasaki, M. Maeda, Journal of Alloys & Compounds, 641 (2015) 64-68.
|
| [5] |
Z.B. Wang, N.R. Tao, W.P. Tong, J. Lu, K. Lu, Acta Mater., 51 (2003) 4319-4329.
|
| [6] |
S. Guo, Z.B. Wang, L.M. Wang, K. Lu, Surf. Coat. Technol., 258 (2014) 329-336.
|
| [7] |
G. Liu, C. Li, Y. Ma, R. Zhang, Y. Liu, Y. Sha, Acta Metallurgica Sinica, 52 (2016) 307-312.
|
| [8] |
H.R. Masiha, H.R. Bagheri, M. Gheytani, M. Aliofkhazraei, A.S. Rouhaghdam, T. Shahrabi, Bull. Mater. Sci., 38 (2015) 935-943.
|
| [9] |
L. Ge, N. Tian, Z. Lu, C. You, Appl. Surf. Sci., 286 (2013) 412-416.
|
| [10] |
K. Lu, Materials Science & Engineering R-Reports, 16 (1996) 161-221.
|
| [11] |
X. Sauvage, G. Wilde, S.V. Divinski, Z. Horita, R.Z. Valiev, Materials Science & Engineering A, 540 (2012) 1-12.
|
| [12] |
W.P. Tong, N.R. Tao, Z.B. Wang, J. Lu, K. Lu, Science, 299 (2003) 686.
|
| [13] |
Z.B. Wang, J. Lu, K. Lu, Acta Mater., 53 (2005) 2081-2089.
|
| [14] |
D.H. Bei, J. Lu, J.F. Gu, K. Lu, J.S. Pan, Transactions of Metal Heat Treatment, 23(2002)19-24.
|
| [15] |
G. Liu, J. Lu, K. Lu, Materials Science & Engineering A, 286 (2000) 91-95.
|
| [16] |
G. Liu, S.C. Wang, X.F. Lou, J. Lu, K. Lu, Scripta Mater., 44 (2001) 1791-1795.
|
| [17] |
N.R. Tao, Z.B. Wang, W.P. Tong, M.L. Sui, J. Lu, K. Lu, Acta Mater., 50 (2002) 4603-4616.
|
| [18] |
Z.B. Wang, N.R. Tao, S. Li, W. Wang, G. Liu, J. Lu, K. Lu, Materials Science & Engineering A, 352 (2003) 144-149.
|
| [19] |
X.P.Yong, G.Liu, Journal of Materials Science & Technology, 19 (2003) 1-4.
|
| [20] |
J.B. Zhang, Z.W. Liu, H.W. Song, W.U. Jie, B. Shi, T.Y. Xiong, Journal of Aeronautical Materials, 24 (2004) 11-15.
|
| [21] |
X.Q. Zhao, X.U. Zheng, J.B. Zhang, H.W. Song, Materials Science & Engineering,21 (2003)706-710.
|
| [22] |
H. Zhang, G. Liu, Z. Hei, J. Lu, K. Lu, Acta Metallrugica Sinica, 39 (2003) 347-350.
|
| [23] |
H.W. Zhang, Z.K. Hei, G. Liu, J. Lu, K. Lu, Acta Mater., 51 (2003) 1871-1881.
|
| [24] |
X.Q. Zhao, T.Y. Xiong, X.U. Zheng, H.W. Song, Journal of Tongji University, 32 (2004) 218-221.
|
| [25] |
A. Lu, Y. Zhang, Y. Li, G. Liu, C. Liu, Chinese Journal of Materials Research, 19 (2005) 118-124.
|
| [26] |
A.Q. Lu, G. Liu, C.M. Liu, Acta Metallrugica Sinica, 40 (2004) 943-947.
|
| [27] |
Y.M. Wang, K. Wang, D. Pan, K. Lu, K.J. Hemker, E. Ma, Scripta Mater., 48 (2003) 1581-1586.
|
| [28] |
Y.Q. Zhao, K.Y. Zhu, Rare Metal Materials & Engineering, 33 (2004) 615-619.
|
| [29] |
K.Y. Zhu, A. Vassel, F. Brisset, K. Lu, J. Lu, Acta Mater., 52 (2004) 4101-4110.
|
| [30] |
Y.F. Luo, Y.M. Jiang, Z. Cheng, D. Bo, L.I. Jin, Heat Treat. Met., 33 (2008) 55-58.
|
| [31] |
T.W. Han, S.H. Zhong, Chinese Quarterly of Mechanics, 28(2007)41-44.
|
| [32] |
T. Balusamy, T.S.N.S. Narayanan, K. Ravichandran, I.S. Park, H.L. Min, Surface & Coatings Technology, 232 (2013) 60-67.
|
| [1] |
Lei Guo, Jin-tao Gao, Sheng-ping Zhong, Zhan-cheng Guo. Phosphorus migration mechanism between iron and high phosphorus gangue phase at high temperatures[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(2): 113-122. |
| [2] |
Lei Guo, Jin-tao Gao, Sheng-ping Zhong, Qi-peng Bao, Zhan-cheng Guo. In situ observation of iron ore particle reduction above 1373 K by confocal microscopy[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(1): 32-41. |
| [3] |
Yuan-dong Pei,, . Sheng-li Wu . Xiao-jing Shao, . Zhi-xing Zhao, . Gang An . Ze-jun Ma, . Wei-dong Zhang,. Establishment and industrial practice of high-temperature process evaluation system in sintering[J]. , 2018, 25(9): 910-922. |
| [4] |
Ran Wang, Zheng-gen Liu Man-sheng Chu Hong-tao Wang Wei Zhao Li-hua Gao. Modeling assessment of recovering iron from red mud by direct reduction: magnetic separation based on response surface methodology[J]. , 2018, 25(5): 497-505. |
| [5] |
Hong-ming Long, ? Qi Shi ? Hong-liang Zhang ? Ru-fei Wei ? Tie-jun Chun ? Jia-xin Li. Application status and comparison of dioxin removal technologies for iron ore sintering process[J]. , 2018, 25(4): 357-365. |
| [6] |
Guang Wang Qing-guo Xue Jing-song Wang. Reduction and melting separation mechanism of boron-bearing iron concentrate/coal composite pellet[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2018, 25(3): 310-319. |
|
|
|
|
2018, Vol. 25 
