|
|
Effect of hot rolling process microstructure properties 2205/Q235 plate |
Meng Yan1 . Jing-na Sun1 . Hua-gui Huang1 . Lei Chen1 . Ke Dong2 . Zhen-ye Chen3 |
1 National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, Hebei, China 2 China National Heavy Machinery Research Institute Co., Ltd., Xi’an 710032, Shaanxi, China 3 HBIS GROUP Central Iron and Steel Research Institute, Shijiazhuang 050023, Hebei, China |
|
|
Abstract The 2205/Q235 clad plate was fabricated by vacuum hot rolling with symmetrical assembling pattern of Q235/2205/2205/ Q235. The flow stress behavior and processing map of 2205 duplex stainless steel (DSS) were investigated by hot compressive tests on a Gleeble-3800 simulator. Then, thermal–mechanical coupled nonlinear finite element models of vacuum hot rolling and subsequent cooling process were established. From the simulation results, the influence of rolling reduction and rolling speed on hot deformation state of 2205 DSS in the assembled slab was disclosed and the optimal rolling parameters were presented. Meanwhile, the cooling rate of 2205 DSS under different cooling conditions and thicknesses of the clad plate was obtained. According to the numerical simulation results, pilot experiments were successfully carried out on a laboratory scale. The material universal testing machine, optical microscope, scanning electron microscope and energy-dispersive spectrometer were used to evaluate the mechanical properties and microstructure of bonding interface and 2205 DSS matrix for different rolling reduction and cooling processes. The results showed that with symmetrical assembling pattern, the approximate thermodynamic conditions can be established for 2205 DSS to avoid cracks in hot rolling process. When the rolling reduction increased from 10 to 40%, the shear strength of the bonding interface is increased from 120 to 530 MPa, and the uniform two-phase microstructure of 2205 DSS and satisfactory mechanical properties can be obtained with cooling rate higher than 10 C/s between 1050 and 500 C after rolling.
|
Received: 12 March 2018
Published: 07 January 2019
|
|
|
|
Cite this article: |
HUANG Hua-Gui. Effect of hot rolling process microstructure properties 2205/Q235 plate[J]. Journal of Iron and Steel Research International, 2018, 25(11): 1113-1122.
|
|
|
|
[1] |
YIN Bin, LI Wan-ming, WU Shao-peng, ZANG Xi-min, YU Hao-cen. Thermodynamic analysis of Al and Ti element loss in electroslag remelting Inconel718 superalloy[J]. Iron and Steel, 2019, 54(5): 86-94. |
[2] |
WANG Chun-mei1, LI Zhi-liang2. Method for improving efficiency of cold rolling logistics[J]. Iron and Steel, 2019, 54(5): 95-99. |
[3] |
WANG Xiao-ai1, JIANG Xin2, GAO Yuan3, HUO Hong-yan3, SHEN Feng-man2. Investigation on fluidity of SFCA and sintering strength based on phase diagram[J]. Iron and Steel, 2019, 54(5): 9-13. |
[4] |
ZHANG Lin-lin, FU Gang-hua, GUO Yu-feng, CHEN Feng, ZHENG Fu-qiang . Effect of basicity on quality of green fluxed pellets[J]. Iron and Steel, 2019, 54(5): 14-18. |
[5] |
MA Xiao-gang, CHEN Liang-yu, LI Yang. Calculation of convective heat transfer coefficient of hearth cooling stave and furnace heating transfer characteristics[J]. Iron and Steel, 2019, 54(5): 19-26. |
[6] |
ZHANG Jian-jun1,2, MAO Xin-ping 2, WANG Chun-feng3, ZHU Wan-jun2. Development and expection on high-efficiency producing technology of steelmaking in TSCR line[J]. Iron and Steel, 2019, 54(5): 1-8. |
|
|
|
|