|
|
Evaluation of casting fluidity and filling capacity of Zr-based amorphous metal melts |
De-qiang Ma1,2 · Xiao-zhao Ma2 · Hong-yuan Zhang2 · Ming-zhen Ma2 · Xin-yu Zhang2 · Ri-ping Liu2 |
1 Department of Electromechanical Engineering, Tangshan University, Tangshan 063000, Hebei, China 2 State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, Hebei, China |
|
|
Abstract Understanding the flow characteristics of amorphous metal melts is important for casting and molding processes. Fluidity of Zr-based amorphous metal melts was determined by using a self-designed apparatus. Phase analysis demonstrated that the fluidity test samples were fully amorphous structure. The onset crystallization temperature significantly moved toward high temperature with the increases of casting temperature, which improved the glass-forming ability and thermal stability of Zr-based amorphous metal. Fluidity test results demonstrated that the fluidity length increased monotonically with the increases of temperature, pressure, and runner diameter. By identifying the types and quantities of the defect in castings, it could conclude that smooth filling processes occurred under appropriate conditions. Experimental results indicated that the flow behavior of the Zr-based amorphous metal melts strongly depended on the casting temperature and equivalent thickness. Constitutive equation based on Newton’s law of heat exchange and Rayleigh rule was established to evaluate the fluidity of Zr-based amorphous metal melts. Theoretical calculations and experimental tests were basically coincided with each other. The determined optimal casting temperatures and equivalent thicknesses were adopted to successfully fabricate a series of fully shaped castings through gravity casting.
|
Received: 17 August 2017
Published: 07 January 2019
|
|
|
|
Cite this article: |
XIAOZHAO -Ma,HONGYUAN -Zhang,MINGZHEN -Ma, et al. Evaluation of casting fluidity and filling capacity of Zr-based amorphous metal melts[J]. Journal of Iron and Steel Research International, 2018, 25(11): 1163-1171.
|
|
|
|
[1] |
W.L. Johnson, MRS Bull. 24 (1999) 42.
|
[2] |
W.H. Wang, C. Dong, C.H. Shek, Mater. Sci. Eng. R 44 (2004) 45–89.
|
[3] |
A. Peker, W.L. Johnson, Appl. Phys. Lett. 63 (1993) 2342–2344.
|
[4] |
W.L. Johnson, Mater. Sci. Forum 225 (1996) 35–49.
|
[5] |
C.Y. Yu, X.J. Liu, C.T. Liu, Intermetallics 53 (2014) 177–182.
|
[6] |
J.F. Sun, Y.J. Huang, J. Shen, G. Wang, D.G. McCartney, J. Alloys Comp. 415 (2006) 198–213.
|
[7] |
J. Schroers, JOM. 57 (2005) 35–39.
|
[8] |
R. Busch, A. Masuhr, W.L. Johnson, Mater. Sci. Eng. A 304–306 (2001) 97–102.
|
[9] |
Gongyao Wang, Qingming Feng, Bing Yang, Wenhui Jiang, Peter K. Liaw, C.T. Liu, Intermetallics 30 (2012) 1–11.
|
[10] |
S.L. Philo, J.J. Kruzic, Scripta Mater. 62(2010) 473–476.
|
[11] |
M.Z. Ma, R.P. Liu, Y. Xiao, D.C. Lou, L. Liu, Q. Wang et. al., Mater. Sci. Eng. A 386 (2004) 326–330.
|
[12] |
S.X. Song, T.G. Nieh, Intermetallics 19 (2011) 1968–1977.
|
[13] |
Y.H. Liu, C.T. Liu, A. Gali, A. Inoue, M.W. Chen, Intermetallics 18 (2010) 1455–1464.
|
[14] |
T. Zhang, X.G. Zhang, W. Zhang, F. Jia, A. Inoue, H. Hao et al., Mater. lett. 65 (2011) 2257–2260.
|
[15] |
E. Soinila, K. Antin, S. Bossuyt, H. H?nninen, J. Alloys Comp. 509 (2011) 210–213.
|
[16] |
Chaoli Ma, Nobuyuki Nishiyama, Akihisa Inoue, Mater. Sci. Eng. A 407 (2005) 201–206.
|
[17] |
M.Z. Ma, H.T. Zong, H.Y. Wang, Y.P. Qi, S.X. Liang, A.J. Song et al., SCI. CHINA SER. G., Mechanics and Astronomy 51 (2008) 438–444.
|
[18] |
V. Kondic, Foundry Trade J. 88 (1950) 691.
|
[19] |
D.V. Ragone, C.M. Adams, H.F. Taylor, Trans. AFS. 64 (1956) 653–657.
|
[20] |
Q.Y. Han, H.B. Xu, Scripta Mater. 53 (2005) 7–10.
|
[21] |
R. Busch, Y. J. Kim, W. L. Johnson, J. Appl. Phys. 77 (1995) 4039–4043.
|
[22] |
K.J. Laws, B. Gun, M. Ferry, Mater. Sci. Eng. A 425(2006) 114–120.
|
[23] |
J. Schroers, W.L. Johnson, J. Appl. Phys. 88 (2000) 44–48.
|
[24] |
S. Mukherjee, Z. Zhou, J. Schroers, W. L. Johnson, W. K. Rhim, Appl. Phys. Lett. 84 (2004) 5010–5012.
|
[25] |
C. C. Hays, J. Schroers, W. L. Johnson, T. J. Rathz, R. W. Hyers, J. R. Rogers, Appl. Phys. Lett. 79 (2001) 1605–1607.
|
[26] |
Jiang M, Ling Z, Meng J, Dai L, Philosophical Magazine 88 (2008) 407–26.
|
[27] |
K.R. Ravi, R.M. Pillai, K.R. Amaranathan, B.C. Pai, M. Chakraborty, J. Alloys Comp. 456 (2008) 201–210.
|
[28] |
Christopher Way, Prashant Wadhwa, Ralf Busch, Acta. Mater. 55 (2007) 2977–2983.
|
[29] |
S. Mukherjee, J. Schroers, Z. Zhou, W.L. Johnson, W.K. Rhim, Acta. Mater. 52 (2004) 3689–3695.
|
[30] |
K.J. Laws, B. Gun, M. Ferry, Mater. Sci. Eng. A 475 (2008) 348–354.
|
[31] |
J. Lu, G. Ravichandran, W.L. Johnson, Acta. Mater. 51 (2003) 3429–3443.
|
[1] |
Yuan-dong Pei,, . Sheng-li Wu . Xiao-jing Shao, . Zhi-xing Zhao, . Gang An . Ze-jun Ma, . Wei-dong Zhang,. Establishment and industrial practice of high-temperature process evaluation system in sintering[J]. , 2018, 25(9): 910-922. |
[2] |
De-hong Lu . Hai-zhou Li . Bo Ren. Effect of Si content on impact-abrasive wear resistance of Al2O3p/steel composites prepared by squeeze casting[J]. , 2018, 25(9): 984-994. |
[3] |
Zhuang Li, ? En-gang Wang, ? Yu Xu,. Behavior of molten steel flow in continuous casting mold with different static magnetic field configurations[J]. , 2018, 25(4): 366-377. |
[4] |
Hai-bin Zuo ? Si-yang Long ? Jing-song Wang ? Wen-tao Guo. Coking properties of thermal soluble constituents of coals by N-methyl-2-pyrrolidone solvent[J]. , 2018, 25(4): 378-386. |
[5] |
Long Guo , . Yun-huan Sui . Xing-zhong Zhang. High-temperature creep constitutional model ofQ460E steel and effect of creep on bulging deformation of continuous casting slab[J]. , 2018, 25(11): 1123-1130. |
[6] |
Peng-tao Liu,, ? Qing-xue Huang,, ? Li-feng Ma, ? Tao Wang. Characterization of hot deformation behavior of wear-resistant steel BTW1 using processing maps and constitutive equations[J]. , 2018, 25(10): 1054-1061. |
|
|
|
|