|
|
|
| Oxidation mechanism and non-isothermal kinetic studies on carbonate iron ore by thermogravimetric analysis |
| Ya-ting Tang1 . Man-sheng Chu1 . Jue Tang1 . Li-hua Gao1 . Zheng-gen Liu1 |
| 1 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China |
|
|
|
|
Abstract Due to the uncertain and heterogeneous compositions of carbonate iron ore after magnetization roasting, an oxidation pretreatment was applied to increase the uniformity of the composition of the ore. The oxidation of carbonate iron ore was characterized using a thermogravimetric method over a temperature range of 723–948 K. It is shown that the oxidation process of carbonate iron ore is complicated and consists of multiple reactions that include the decomposition and oxidation of carbonates such as FeCO3, MnCO3, MgCO3 and CaMg(CO3)2. The main product that results from oxidation is Fe2O3. Because of the low content of other carbonates (MnCO3, MgCO3 and CaMg(CO3)2) in raw carbonate iron ore and the small change in the apparent activation energies during oxidation, the oxidation of carbonate iron ore can be treated as a single-step FeCO3 oxidation reaction. Based on the Ozawa–Flynn–Wall method, which is one of the model-free methods, the apparent activation energy for the oxidation of carbonate iron ore is 284.50 kJ mol-1. The most probable reaction model for the oxidation of carbonate iron ore is the S ˇ esta′k–Berggren model as determined by the theoretical and actual master plot and eigenvalues of the Ma′lek method. The reaction orders n and m are 1.317 and 0.0295, respectively. The preexponential factor is 2.628 9 1017 min-1.
|
|
Received: 15 September 2017
Published: 23 January 2019
|
|
|
|
| Cite this article: |
|
YATING,CHU Man-Sheng,TANG Jue, et al. Oxidation mechanism and non-isothermal kinetic studies on carbonate iron ore by thermogravimetric analysis[J]. Journal of Iron and Steel Research International, 2018, 25(12): 1223-1231.
|
|
|
|
| [1] |
B. Q. Sun, S. L. Fan, Q. B. Zhou, Min. Metall. Eng. 18(1998), 45-49.
|
| [2] |
K. Wang, H. X. Dai, Multipurpose Util. Miner. Resour. 1(2012), 6-9.
|
| [3] |
Y. C. Zhang, X. H. Yang, N. C. Shi, Z. S. Ma, Metal Mine 30(2001), No.1, 48-50.
|
| [4] |
P. H. Li, X. Y. Gao, L. C. Zhao, X. Y. Deng, C. B. Sun, Modern Mining 30(2014), No. 8, 57-58.
|
| [5] |
W. Z. Yin, Y. Q. Ma, M. B. Liu, M. A. Traor, M. Zhang, L. X. Li, Metal Mine 40(2011), No. 8, 64-67.
|
| [6] |
B. Y. Song, L. B. Yuan, S. M. Wei, Min. Metall. Eng. 35(2015), No.5, 63-67.
|
| [7] |
D. Q. Zhu, W. He, J. Pan, Z. X. Xue, Metal Mine 41(2012), No.5, 79-87.
|
| [8] |
Z. L. Feng, Y. F. Yu, G. F. Liu, W. Chen, H. Q. Zhang, Metal Mine 38(2009), No. 9, 58-60.
|
| [9] |
Q. S. Zhu, H. Z. Li, CIESC Journal, 65(2014), No. 7, 2437-2442.
|
| [10] |
G. Baldauf-Sommerbauer, S. Lux, J. Wagner, M. Siebenhofer, Thermochim. Acta 649(2017), 1-12.
|
| [11] |
Z. L. Feng, Y. Yu, G. Liu, W. Chen, J. Wuhan Univ. Technol. 31(2009), No. 17, 11-14.
|
| [12] |
V. Y. Zakharov, Z. Adonyi, Thermochim. Acta 102(1986), No. 86, 101-107.
|
| [13] |
Y. L. Pang, G. X. Xiao, S. W. Jiu, 39(2007), No. 1, 136-139.
|
| [14] |
P. K. Gallagher, S. St. J. Warne, Thermochim. Acta. 43(1981), No. 3, 253-267.
|
| [15] |
Y. H. Luo, D. Q. Zhu, J. Pan, X. L. Zhou, Miner. Process. Extr. Metall. Trans. Inst. Min.Metall. Sect. C 125(2016), No.1, 17-25.
|
| [16] |
G. H. Han, T. Jiang, Y. B. Zhang, Y. F. Huang, G. H. Li, J. Iron steel Res. Int. 18(2011), No. 8, 14-19.
|
| [17] |
Y. Y. Zhang, W. Lv, X. W. Lv, C. G. Bai, K. X. Han, B. Song, J. Iron steel Res. Int. 24(2017), 678-684.
|
| [18] |
D. H. Xia, W. Q. Ao, S. Q. Zhang, Gold (30)2009, 32-36.
|
| [19] |
Y. C. Zhang, X. H. Yang, N. C. Shi, Z. S. Ma, Y. Z. Wang, J. XIANGTAN MIN. INST. 17(2002), 55-57.
|
| [20] |
D. Alkac, ü. Atalay, Int. J. Miner. Process. 87(2008), No. 3-4, 120-182.
|
| [21] |
S. B. Jagtap, A. R. Pande, A. N. Gokarn, Int. J. Miner. Process. 36(1992), No. 1-2, 113-124.
|
| [22] |
A. P. Dhupe, A. N. Gokarn, Int. J. Miner. Process. 28(1990), No. 3-4, p. 209-220.
|
| [23] |
H. Naono, K. Nakai, T. Sueyoshi, H. Yagi, J. Colloid. Interf. SCI. 120(1987), No. 2, 439-450.
|
| [24] |
L. A. Pérezmaqueda, J. M. Blanes, J. Pascual, J. L. Pérezrodriguez, J. EUR. Ceram. Soc. 24(2004), No. 9, 2793-2801.
|
| [25] |
K. J. D. Mackenzie, I. W. M. Brown, C. M. Cardile, R. H. Meinhold, J. Mater. SCI. 22(1987), No. 7, 2645-2654.
|
| [26] |
T. Ozawa, Bull. Chem. Soc. Japan 38(1965), No. 11, 1881-1886.
|
| [27] |
J. H. Flynn, L. A. Wall, J. Res. Nat. Bur. Standards 70A(1966), No. 6, 487-523.
|
| [28] |
C. D. Doyle, J. Appl. Polym. Sci. 6(1962), No. 24, 639-642.
|
| [29] |
S. Vyazovkin, J. Comput. Chem. 22(2001), No. 2, 178-183.
|
| [30] |
G. I. Senum, R. T. Yang, J. Therm. Anal. 11(1977), No. 3, 445-447.
|
| [31] |
J. M. Criado, J. Málek, A. Ortega, Thermochim. Acta 147(1989), No.2, 377-385.
|
| [32] |
J. Málek, Thermochim. Acta 200(1992), No. 92, 257-269.
|
|
|
|
2018, Vol. 25 
