|
|
|
| Austenite transformation and work hardening of medium manganese steel |
| Lei Zhang1,2,3 . Cun-yu Wang2 . Heng-chang Lu2 . Wen-quan Cao2 . Chang Wang2 . Han Dong2 . Leng Chen1 |
1 School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
2 Special Steel Institute of Central Iron and Steel Research Institute, Beijing 100081, China
3 Mechanical Engineering Department of Tangshan Polytechnic College, Tangshan 063299, Hebei, China |
|
|
|
|
Abstract The austenite transformation behavior and mechanical properties of medium manganese steel subjected to tensile strain were studied by electron backscatter diffraction, X-ray diffraction and tensile tests. The results show that the austenite phases are mainly distributed on the grain boundary in the duplex microstructure of austenite and ferrite, and it is easy for the big-size austenite to transform at small beginning tension strain following the mechanisms of both austenite (fcc) → ε-martensite (hcp) → α-martensite (bcc) and austenite (fcc) → α-martensite (bcc). Both yield strength and tensile strength increase with the increase in pre-strain, and the total elongation decreases, while the value of pre-strain plus total elongation almost keeps constant. During tensile deformation, transformation from austenite into martensite improves work-hardening rate remarkably.
|
|
Received: 20 September 2017
Published: 23 January 2019
|
|
|
|
| Cite this article: |
|
ZHANG,YU Cun-Yu,LU Heng-Chang, et al. Austenite transformation and work hardening of medium manganese steel[J]. Journal of Iron and Steel Research International, 2018, 25(12): 1265-1269.
|
|
|
|
| [1] |
S. Oliver, T.B. Jones, G. Fourlaris, Mater. Charact., 58 (2007) 390-400.
|
| [2] |
A. Saha Podder, D. Bhattacharjee, R. K. Ray. ISIJ Int., 47 (2007) 1058-1064.
|
| [3] |
R.H. Wagoner, Report: Advanced High-Strength Steel Workshop, Arlington, Virginaia, USA, October 22–23, 2006.
|
| [4] |
D.K. Matlock, J.G. Speer, Proc.3rd Inter. Conf on Advanced Structural Steels, 2006, 774–781.
|
| [5] |
O. Kwon, S.K. Kim, G. Kim, Proceedings of the 21st Conference on Mechanical Behaviors of Materials, Changwon, Korea, October 18–19, 2007.
|
| [6] |
H.N. Han, C.S. Oh, G. Kim, O. Kwon, Mater. Sci. Eng. A, 499 (2009) 462–468.
|
| [7] |
K. Sugimoto, B. Yu, Y. Mukai, S. Ikeda, ISIJ 45 (2005) 1194–1200.
|
| [8] |
G. Frommeyer, U. Brux, P. Neumann, ISIJ 43 (2003) 438–446.
|
| [9] |
J. Han, S.J. Lee, C.J. Lee, S. Lee, S.Y. Jo, Y.J. Lee, Mater. Sci. Eng. A 633 (2015) 9–16.
|
| [10] |
K.T. Park, Scripta Mater. 68 (2013) 337–338.
|
| [11] |
L.A. Dobrzanski, W. Borek, J. Achiev, Mater. Manuf. Eng. 55 (2012) 230–238.
|
| [12] |
W.S. Li, H.Y. Gao, H. Nakashima, Mater. Sci. Eng. A, 649 (2016) 417-425.
|
| [13] |
H.J. Hu, A.M. Zhao, Z.K. Yin, Transaction of Materials and Heat Treatment, 37 (5) (2016) 128-132(in chinese).
|
| [14] |
C.H. Song, H. Yu, L.L. Li, Mater. Sci. Eng. A, 670 (2016) 326–334
|
| [15] |
Y. Zhou, Material Analysis Method. 2006, China Machine Press(in chinese).
|
| [16] |
C. Wang, J. Shi, C. Y. Wang, ISIJ Int, 2011,51(4):651–656.
|
| [17] |
H. B. Jiang, X. N. Luo, X. Y. Zhong, J. of Iron and Steel Res（acceptable）.
|
| [18] |
J. Lin，X N. Luo，X. Y. Zhong，H. H. Zhou, J. of Iron and Steel Res.2016, 23(12):1277-1280.
|
| [19] |
E. Jimenez-Melero, N.H. van Dijk, L. Zhao, Scripta. Mater. 56 (5) (2007) 421–424.
|
| [20] |
F.Y. Lu, P. Yang, L. Meng, Acta Metall. 46 (10) (2010) 1153-1160.
|
| [21] |
P. Yang, F.Y. Lu, L. Meng, Acta Metall. 46 (6) (2010) 657-665.
|
| [22] |
S. Liu, Z. Xiong, H. Guo, Acta Mater, 124 (2017) 159-172.
|
| [23] |
C. Wang, Diploma Thesis, Central Iron & Steel Research Institute, 2016.
|
| [24] |
D.T. Jiao, Q.W. Cai，H. B. Wu, Acta Metall, 45 (9) (2009) 1111－1116．
|
| [25] |
W.X. Song. Physical Metallergy.1980, Metallurgical Industry Press(in chinese).
|
| [26] |
W.F. Zhang, Y.M. Chen, J.H. Zhu, J. of Xi′an Jiao Tong University, 33 (10) (1999) 64-67.
|
| [27] |
Z.H. Cai, Q.B. Xin, H. Kong, J. of Northeastern University (Natural Science), 34(12) (2013) 1721-1729.
|
| [28] |
C. Wang, W.Q. Cao, J. Shi, Mater. Sci. Eng. A, 2013,562:89-95
|
| [1] |
Tao Liu, Mu-jun Long, Wen-jie He, Deng-fu Chen, Zhi-hua Dong, Xian-guang Zhang, Hua-mei Duan. Prediction model for austenite grains growth during reheating process in Ti micro-alloyed cast steel by coupling precipitates dissolution and coarsening behavior[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(2): 162-172. |
| [2] |
Wen-gang Bu, Wei Zhang, Jin-liang Gao, Yan Qi, Dong-liang Zhao, Xiao-ping Dong, Yang-huan Zhang. Structure and electrochemical performances of as-milled LaMg12-type alloy–Ni composites[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(1): 59-68. |
| [3] |
He Wei, Yin-li Chen, Lan Su, Di Tang. Effect of simulated thermomechanical processing on transformation behavior and microstructure of 82B steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(1): 69-77. |
| [4] |
Jian Cheng, Yue-hua Guo, Ming Liu, Hou-fa Shen. Influence of N/C ratio on microstructure and properties of new high-strength weathering steels[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(1): 84-90. |
| [5] |
Kai Ding Hui-jun Ji Quan-liang Zhang Xia Liu ? Peng Wang Xiao-hong Li Ling Zhang Yu-lai Gao. Anomalous residual austenite formation in root of welding layers of 9% Cr/CrMoV dissimilar welded joint[J]. , 2018, 25(8): 839-846. |
| [6] |
Xi-yang Chai, . Tao Pan . Feng Chai . Xiao-bing Luo . Hang Su . Zhi-gang Yang . Cai-fu Yang. Interlayer engineering for titanium clad steel by hot roll bonding[J]. , 2018, 25(7): 739-745. |
|
|
|
|
2018, Vol. 25 
