|
|
|
| Effects of silicon addition on optical properties of mould flux with iron oxide and estimation of apparent thermal conductivity of flux |
| Rie Endo1, Yo Kan2, Takashi Watanabe1, Miyuki Hayashi1, Masahiro Susa1 |
| 1 Department of Materials Science and Engineering, Tokyo Institute of Technology, Tokyo 152-8552, Japan
2 Department of Metallurgy and Ceramics Science, Tokyo Institute of Technology, Tokyo 152-8552, Japan |
|
|
|
|
Abstract Mould flux with high absorptivity had been obtained in the reduction process of mould flux by silicon. For further utilisation of the mould flux with high absorptivity, the effect of silicon addition on the optical property has been investigated. The synthesised mould flux powder with iron oxide was melted with the addition of silicon powder at 1703 K followed by quenching, thus forming a glassy sample. After 5–30-min reduction, the samples exhibited black opaque colour. Meanwhile, the samples that were reduced for 45–60 min had a bluish grey colour. Many iron-based particles dispersed in the samples were micrometre order in diameter. To determine the effect of iron particles on the optical properties of the sample, extinction, scattering and absorption efficiencies were calculated according to Mie theory. Result showed that both scattering on the iron particle and absorption by iron effectively increase the extinction efficiency in the mould flux. Moreover, the silicon particle in the flux has large scattering efficiency. The black opaque colour is contributed by the existence of silicon and iron particles. The apparent thermal conductivity was calculated for the solid flux. Results also indicated that the entire glassy mould flux would effectively work for mild cooling in a continuous casting process owing to high absorptivity and small thermal conductivity.
|
|
Received: 30 September 2018
Published: 17 January 2019
|
|
|
|
| Cite this article: |
|
Rie Endo,Yo Kan,Takashi Watanabe, et al. Effects of silicon addition on optical properties of mould flux with iron oxide and estimation of apparent thermal conductivity of flux [J]. Journal of Iron and Steel Research International, 2019, 26(4): 365-373.
|
|
|
|
| [1] |
Jian-liang Sun, Xing-ming Du, Kai Li, Yan Peng. Longitudinally profiled plate leveling theory based on linear decreasing leveling scheme[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(2): 130-136. |
| [2] |
Lei Guo, Jin-tao Gao, Sheng-ping Zhong, Qi-peng Bao, Zhan-cheng Guo. In situ observation of iron ore particle reduction above 1373 K by confocal microscopy[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(1): 32-41. |
| [3] |
Ran Wang, Zheng-gen Liu Man-sheng Chu Hong-tao Wang Wei Zhao Li-hua Gao. Modeling assessment of recovering iron from red mud by direct reduction: magnetic separation based on response surface methodology[J]. , 2018, 25(5): 497-505. |
| [4] |
Hong-ming Long, ? Qi Shi ? Hong-liang Zhang ? Ru-fei Wei ? Tie-jun Chun ? Jia-xin Li. Application status and comparison of dioxin removal technologies for iron ore sintering process[J]. , 2018, 25(4): 357-365. |
| [5] |
Bo Zhang, ? Da-ping Wang ? Bin Chen ? Zhen-jian Su ? Zheng-liang Xue. Experimental study on smelting reduction of carbon-bearing manganese briquettes in slag bath[J]. , 2018, 25(4): 417-425. |
| [6] |
Guang Wang Qing-guo Xue Jing-song Wang. Reduction and melting separation mechanism of boron-bearing iron concentrate/coal composite pellet[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2018, 25(3): 310-319. |
|
|
|
|
2019, Vol. 26 
