|
|
|
| Behavior of Nb influence on structure and properties of 30Cr13 cast martensitic stainless steel |
| Yang-fan Jin 1 , Tuo Zhang 1 , Qi-yu Zang 1 , Yi-tao Yang 1 |
| 1 School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China |
|
|
|
|
Abstract The microstructure, mechanical properties and corrosion resistance of 30Cr13 martensitic stainless steel (MSS) with different Nb contents were investigated by using the optical microscope, scanning electron microscope, X-ray diffractometer, HRC hardness measurement apparatus and tensile testing machine. Nb was found to retard the formation of austenite and promote the precipitation of carbides by calculating. The results showed that the addition of 0.2 wt.% Nb elements could improve the strength and corrosion resistance of 30Cr13 martensitic stainless steels while the reduction in toughness was less because of the inhibited effect on Cr-rich carbides precipitation by Nb addition. Specially, M23C6-type carbides almost disappeared in 0.6Nb-MSS. Moreover, the main existent form of Nb element was NbC and the strong carbide-forming ability of Nb element increased the quantity of carbides with the morphology changing from sphericaltype to chain-type. 0.2Nb-MSS shows excellent strength, adequate toughness and sufficient corrosion resistance for the application.
|
|
|
|
|
|
| Cite this article: |
|
Yang-fan Jin,Tuo Zhang,Qi-yu Zang, et al. Behavior of Nb influence on structure and properties of 30Cr13 cast martensitic stainless steel[J]. Journal of Iron and Steel Research International, 2019, 26(5): 462-471.
|
|
|
|
| [1] |
Hong-bin Li, Xiao-ping Zheng, De-cheng Wan, Lian-sheng Chen. Effect of time interval on microstructure evolution of medium carbon steel during warm deformation[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(6): 602-610. |
| [2] |
Hou-long Liu, Ming-yu Ma, Ling-ling Liu, Liang-liang Wei, Li-qing Chen. Effect of W addition on hot deformation and precipitation behaviors of 19Cr2Mo ferritic stainless steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(5): 425-434. |
| [3] |
Jian Wang, Wan-li Chen, Hao-jie Meng, Yi-shi Cui, Cai-li Zhang, Pei-de Han. Influence of sigma phase on corrosion and mechanical properties of 2707 hyper-duplex stainless steel aged for short periods[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(5): 452-461. |
| [4] |
Hao-nan Lou, Chao Wang, Bing-xing Wang, Zhao-dong Wang, R.D.K. Misra. Effect of Ti–Mg–Ca treatment on properties of heat-affected zone after high heat input welding[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(5): 501-511. |
| [5] |
Tong-bang An, Jin-shan Wei, Lin Zhao, Ji-guo Shan, Zhi-ling Tian. Influence of carbon content on microstructure and mechanical properties of 1000 MPa deposited metal by gas metal arc welding[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(5): 512-518. |
| [6] |
Shan-shan Liu, Hai-yan Chen, Xuan Zhao, Li Fan, Xiao-ming Guo, Yan-sheng Yin. Corrosion behavior of Ni-based coating containing spherical tungsten carbides in hydrochloric acid solution[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(2): 191-199. |
|
|
|
|
2019, Vol. 26 
