|
|
|
| Extraction of iron and aluminum from high-iron bauxite by ammonium sulfate roasting and water leaching |
| Ding Tian1,2 Xiao-yi Shen1,3 Yu-chun Zhai1,4 Penny Xiao5 Paul Webley5 |
| 1 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China； 2 School of Material Science and Engineering, Dalian Jiaotong University, Dalian 116028, Liaoning, China； 3 Liaoning Key Laboratory for Metallurgical Sensor and Technology, Northeastern University, Shenyang 110819, Liaoning, China； 4 School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004, Hebei, China；5 Department of Chemical & Biomolecular Engineering, University of Melbourne, Melbourne 3010, VIC, Australia |
|
|
|
|
Abstract High iron content is one of the challenges in utilizing the refractory bauxites in China. An improved method for treating the high-iron bauxite by roasting with (NH4)2SO4 was proposed, which offers a possible alternative method for utilizing the high-iron bauxite. The influences of the roasting time, roasting temperature, material ratio, and ore particle size on the extraction ratios of Fe and Al were studied, and the orthogonal test was used to optimize the reaction conditions. The optimized reaction conditions were proposed as follows: roasting temperature of 450 C, roasting time of 120 min, material ratio of (NH4)2SO4 to ore of 2.5:1.0, and ore particle size below 80 lm. The roasting mechanism and kinetic parameters including the apparent activation energy and reaction rate constant were investigated. The results showed that the control step of the roasting process was the internal diffusion on the product layer and the apparent activation energy was 19.22 kJ mol-1 in the reaction temperature range. The kinetic equation was obtained finally.
|
|
|
|
|
|
| Cite this article: |
|
Ding Tian,Xiao-yi Shen,Yu-chun Zhai, et al. Extraction of iron and aluminum from high-iron bauxite by ammonium sulfate roasting and water leaching[J]. Journal of Iron and Steel Research International, 2019, 26(6): 578-584.
|
|
|
|
| [1] |
Ya-ru Cui, Hao-yue Fan, Zi-liang Guo, Guo-hua Wang, Xiao-ming Li, Jun-xue Zhao . Volatilization behaviour and volatilization kinetics of CaF2–Na2O–CaO–SiO2–Al2O3–MgO–B2O3 synthetic mould flux[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(4): 412-421. |
| [2] |
Bo Zhang, ? Da-ping Wang ? Bin Chen ? Zhen-jian Su ? Zheng-liang Xue. Experimental study on smelting reduction of carbon-bearing manganese briquettes in slag bath[J]. , 2018, 25(4): 417-425. |
| [3] |
Dong Wang Si-yi Luo Yang-min Zhou Chui-jie Yi. Thermogravimetric study of combustion of biomass and anthracite coal by iso-conversional method[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2018, 25(3): 330-339. |
| [4] |
Run-sheng Xu, . Wei Wang, . Bo-wen Dai,. Influence of particle size on combustion behavior of bamboo char used for blast furnace injection[J]. , 2018, 25(12): 1213-1222. |
| [5] |
Yang-huan Zhang, . Kai-feng Zhang, . Ze-ming Yuan, . Ya-qin Li . Hong-wei Shang . Yan Qi . Xiao-ping Dong . Dong-liang Zhao. Improved hydrogen storage performance of as-milled Sm–Mg–Ni alloy by adding CeO2[J]. , 2018, 25(12): 1255-1264. |
| [6] |
Qing-min Meng . Jia-xin Li, . Ru-fei Wei . Hong-ming Long, . Tie-jun Chun . Ping Wan . Zhan-xia Di . Luana Dessbesell . Chunbao Xu. Effects of gangue compositions on reduction process of carbon-bearing iron ore pellets[J]. , 2018, 25(11): 1105-1112. |
|
|
|
|
2019, Vol. 26 
