|
|
Case-based reasoning model based on attribute weights optimized by genetic algorithm for predicting end temperature of molten steel in RH |
Kai Feng 1,2 An-jun Xu 1 Peng-fei Wu 3 Dong-feng He 1 Hong-bing Wang 4 |
1 School of Metallurgy and Ecology Engineering, University of Science and Technology, Beijing 100083, China; 2 Beijing Key Laboratory of Knowledge Engineering for Materials Science, University of Science and Technology, Beijing 100083, China; 3 China Minmetals Corporation, Beijing 100010, China; 4 School of Computer and Communication Engineering, University of Science and Technology, Beijing 100083, China |
|
|
Abstract Temperature control is the key of Ruhrstahl-Heraeus (RH) process in steelmaking plant. The accuracy of RH control model greatly affects the molten steel temperature fluctuation. To obtain RH control model with higher accuracy, an improved case-based reasoning (CBR) model based on attribute weights optimized by genetic algorithm (GA) was proposed. The fitness function in GA was determined according to the prediction accuracy of end temperature of molten steel in RH; then, GA is used to optimize all the attribute weights based on known case base. An improved CBR model that contains the optimized attribute weights was applied to predict end temperature of molten steel in RH, and the prediction accuracy was calculated. Four methods, CBR based on attribute weights optimized by GA (CBR–GA), ordinary CBR, back propagation neural network (BPNN) and multiple linear regression (MLR) method were employed for comparison. The results show that in the error range of [- 3 °C, 3 °C], [- 5 °C, 5 °C], [- 7 °C, 7 °C] and [- 10 °C, 10 °C], the prediction accuracy of CBR–GA was improved by 19.99%, 28.19%, 27.11% and 16.3%, respectively, than that of MLR. Compared with BPNN, the prediction accuracy increased by 3.22%, 7.44%, 5.29% and 2.40%, respectively. Compared with ordinary CBR, the accuracy increased by 5.43%, 5.80%, 4.66% and 2.27%, respectively.
|
|
|
|
|
Cite this article: |
Kai Feng,An-jun Xu,Peng-fei Wu, et al. Case-based reasoning model based on attribute weights optimized by genetic algorithm for predicting end temperature of molten steel in RH[J]. Journal of Iron and Steel Research International, 2019, 26(6): 585-592.
|
|
|
|
[1] |
Zhuang Li, ? En-gang Wang, ? Yu Xu,. Behavior of molten steel flow in continuous casting mold with different static magnetic field configurations[J]. , 2018, 25(4): 366-377. |
[2] |
Yi- hong LI,,Yan- ping BAO,Rui WANG,Min WANG,Qing- xue HUANG,Yu- gui LI. Modeling of Liquid Level and Bubble Behavior in Vacuum Chamber of RH Process[J]. Chinese Journal of Iron and Steel, 2016, 23(4): 305-313. |
[3] |
Kai FENG, , Dong-feng HE, , An-jun XU, , Hong-bing WANG. End Temperature Prediction of Molten Steel in RH Based on Case-based Reasoning with Optimized Case Base[J]. Chinese Journal of Iron and Steel, 2015, 22(Supplement 1): 68-74. |
[4] |
Meng YUAN,Ping ZHOU,Ming-liang LI,Rui-feng LI,Hong WANG,,Tian-you CHAI. Intelligent Multivariable Modeling of Blast Furnace Molten Iron Quality Based on Dynamic AGA-ANN and PCA[J]. Chinese Journal of Iron and Steel, 2015, 22(6): 487-495. |
[5] |
P. M. AJITH, T. M.AFSAL HUSAIN, P. SATHIYA, S. ARAVINDAN. Multi-objective Optimization of Continuous Drive Friction Welding Process Parameters Using Response Surface Methodology with Intelligent Optimization Algorithm[J]. Chinese Journal of Iron and Steel, 2015, 22(10): 954-960. |
[6] |
Fei HE,,Dong-feng HE,,An-jun XU,,Hong-bing WANG,Nai-yuan TIAN,. Hybrid Model of Molten Steel Temperature Prediction Based on Ladle Heat Status and Artificial Neural Network[J]. Chinese Journal of Iron and Steel, 2014, 21(2): 181-190. |
|
|
|
|