|
|
|
| MMPP/M/C queue with congestion-based staffing policy and applications in operations of steel industry |
| Yan-he Jia1, Li-xin Tang1, Zhe George Zhang2,3, Xiao-feng Chen3 |
| 1 Liaoning Key Laboratory of Manufacturing System and Logistics, Institute of Industrial and Systems Engineering, Northeastern University, Shenyang 110819, Liaoning, China;
2 Beedie School of Business, Simon Fraser University, Burnaby, BC V5A 1S6, Canada;
3 Department of Decision Sciences, Western Washington University, Bellingham, WA 98225, USA |
|
|
|
|
Abstract A queueing model of the Markov-modulated Poisson process (MMPP) with thresholds was investigated. The customer arrival with various arrival rates in the model was viewed as the MMPP. In contrast to the Poisson’s arrival process, the MMPP can better describe the situation that the arrival rate changes with changing conditions; therefore, the model fits better with reality. The threshold conversion was added to the model based on the general MMPP/M/C model. When the number of customers in the system exceeds a threshold, all servers work to serve; when the number of customers in the system is less than another threshold, some servers are shut down. This is the congestion-based staffing policy with two thresholds. Specifically, the problems in the slab stocking stage of slab production at the Iron and Steel Complex in China were analysed. In the slab production process, because the rate of the upstream steelmaking is not constant, the rate of slab reaching the slab yard is uncertain. The crane service is used to store slabs in a warehouse. Because the slab arrival rate varies, different numbers of cranes in service need to be optimized for cost control. Thus, MMPP was used to describe slab arrival with varied arrival rates. Therefore, an MMPP/M/C queue with thresholds was used to analyse and solve the practical problems, and the optimal number of service cranes was obtained to minimize the cost of slab stocking.
|
|
Received: 29 March 2018
Published: 11 September 2018
|
|
|
|
| Cite this article: |
|
Yan-he Jia,Li-xin Tang,Zhe George Zhang, et al. MMPP/M/C queue with congestion-based staffing policy and applications in operations of steel industry[J]. Journal of Iron and Steel Research International, 2019, 26(7): 659-668.
|
|
|
|
| [1] |
Wan-ming Li,Zhou-hua Jiang,,*,Xi-min Zang,Xin Deng. Modeling of flow and temperature distribution in electroslag remelting withdrawal process for fabricating large-scale slab ingots[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 569-578. |
| [2] |
Si-qian Bao,,*,Yang Xu,Gang Zhao,,Xiang-bin Huang,Huan Xiao,Chuan-long Ye, Na-na Song,Qing-ming Chang. Microstructure, texture and precipitates of grain-oriented silicon steel produced by thin slab casting and rolling process[J]. Chinese Journal of Iron and Steel, 2017, 24(1): 91-96. |
| [3] |
Nan WANG,Jin XU,Shan YU,Guang-zong ZHANG,Guang-hao CHEN,Min CHEN. Effect of Scale Formation on Copper Enrichment Behavior in Continuously Cast Slab[J]. Chinese Journal of Iron and Steel, 2016, 23(8): 739-744. |
| [4] |
Hui ZHANG,Peng HU,,Ming-lin WANG. Mechanism and Improvement of Straight Edge Seam Defect on Hot-rolled Plate Surfaces through Use of Chamfered Slabs[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 539-546. |
| [5] |
Gong-tao LIU,Zhi-qiao LIU,Ping YANG,Wei-min MAO. Correlation between Primary and Secondary Recrystallization Texture Components in Low-temperature Reheated Grain-oriented Silicon Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(11): 1234-1242. |
| [6] |
Dong-feng HE, Sheng CHANG, Hong-bing WANG. Controlling Transverse Cracks of Slab Based on Edge Control Technology[J]. Chinese Journal of Iron and Steel, 2015, 22(Supplement 1): 42-47. |
|
|
|
|
2019, Vol. 26 
