|
|
Microstructure–mechanical property relationship in Ti–Mo microalloyed steel with random and interphase precipitates |
Hai-long Yi 1 , Lu-ran Zhang 1 , Rui-hai Duan 1 , Xin-zeng Liang 1 |
1 State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, Liaoning, China |
|
|
Abstract The relationship between microstructure and mechanical properties of Ti–Mo microalloyed steels composed of ferrite and bainite with nanometer-sized carbides and isothermally transformed at different temperatures and time was systematically investigated by tensile test, hardness test, and transmission electron microscopy. Ferrite formed at high temperatures exhibited both planar/curved sheet-like dispersions of interphase precipitates and random dispersion precipitates, with the interphase precipitates being the dominant morphology. In contrast, bainite formed at low temperatures exhibited only random dispersion precipitates. Furthermore, random dispersion precipitates and interphase precipitates were observed within the same ferrite grains. The mechanical properties of the ferrite specimen were superior to those of the bainite specimen. The stress–strain curves of both specimens indicated continuous yielding, high strength, and sufficient tensile elongation. The strengthening of the ferrite specimen was attributed to grain size strengthening, dislocation strengthening, and precipitation hardening, and the degree of precipitation strengthening was approximately 300 MPa.
|
|
|
|
|
Cite this article: |
Hai-long Yi,Lu-ran Zhang,Rui-hai Duan, et al. Microstructure–mechanical property relationship in Ti–Mo microalloyed steel with random and interphase precipitates[J]. Journal of Iron and Steel Research International, 2019, 26(8): 838-845.
|
|
|
|
[1] |
Xian-hong Han, Cheng-long Wang, Yuan-yuan Li, Gang Liu. Effects of quenching and partitioning process on mechanical properties of TRIP780 steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(9): 991-999. |
[2] |
Jun-yu Tian, Guang Xu, Ming-xing Zhou, Hai-jiang Hu, Zheng-liang Xue. Effects of Al addition on bainite transformation and properties of high-strength carbide-free bainitic steels[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(8): 846-855. |
[3] |
Hua Zhang, Yan-xin Wu, Qiu-ju Li, Xin Hong. Effect of matrix structure on mechanical properties and dry rolling– sliding wear performance of alloyed ductile iron[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(8): 888-897. |
[4] |
Hui-ning Zhang, Qiu-yan Wu, Zhen-ying Hu, Hui Li, Hui-hui Xiong, An-jun Xu. First-principles study on stability, electronic, and mechanical properties of La–C and Ce–C binary compounds[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(7): 771-778. |
[5] |
Jian Wang, Wan-li Chen, Hao-jie Meng, Yi-shi Cui, Cai-li Zhang, Pei-de Han. Influence of sigma phase on corrosion and mechanical properties of 2707 hyper-duplex stainless steel aged for short periods[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(5): 452-461. |
[6] |
Yang-fan Jin, Tuo Zhang, Qi-yu Zang, Yi-tao Yang. Behavior of Nb influence on structure and properties of 30Cr13 cast martensitic stainless steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(5): 462-471. |
|
|
|
|