|
|
Technological innovations of electric arc furnace bottom-blowing in China |
Guang-sheng Wei1,2, Rong Zhu1,2, Yun Wang1,2, Xue-tao Wu1, Kai Dong1,2 |
1 School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China 2 Beijing Key Laboratory of Research Center of Special Melting and Preparation of High-End Metal Materials, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract Nowadays, in China, the bottom-blowing technique plays an important role in accelerating the molten bath stirring and promoting the metallurgical reactions in electric arc furnace (EAF) steelmaking. The innovations of bottom-blowing technologies in EAF steelmaking were reviewed. The optimized bottom-blowing arrangement in EAF based on the furnace structure and the position of electrodes was introduced, and the fluid flow characteristics of EAF molten bath with bottomblowing were analyzed. Furthermore, bottom-blowing CO2 in EAF can facilitate the carbon–oxygen reaction reaching equilibrium and decrease the content of nitrogen in molten steel due to its special metallurgical properties. Pulsating bottom-blowing in EAF can effectively improve the molten bath stirring through the action of the unsteady bottom blowing gas streams, which could make the fluid flow field more disorderly than the steady bottom-blowing. And submerged O2 injection with CO2 in EAF can noticeably strengthen the EAF molten bath stirring, increase the production efficiency and improve the molten steel quality.
|
|
|
|
|
Cite this article: |
Guang-sheng Wei,Rong Zhu,Yun Wang, et al. Technological innovations of electric arc furnace bottom-blowing in China[J]. Journal of Iron and Steel Research International, 2019, 26(9): 909-916.
|
|
|
|
[1] |
Yang Li Hai-yang Yu Hua-mei Yang Feng Zheng Xiong Zhang Bei-bei Xiong Qiang Zhen Hong-wei Ni. Separation and comprehensive utilization of valuable elements in Ti-bearing electric arc furnace molten slag[J]. , 2018, 25(5): 487-496. |
[2] |
Shao-yan Hu, · Rong Zhu, · Run-zao Liu, · Kai .Dong, · Fu-hai .Liu, · Guo-hong .Ma, · Rong-fang Su. Numerical simulation and.experimental measurement of.transport phenomena for.coherent jet with. CH4 +.N2 mixed fuel gas[J]. , 2018, 25(1): 28-36. |
[3] |
Shao-chun CHEN,,Rong ZHU,Jing-she LI,Chun-lai HE,Ming L. Three-phase Fluid Numerical Simulation and Water Modeling Experiment of Supersonic Oxygen Jet Impingement on Molten Bath in EAF[J]. Chinese Journal of Iron and Steel, 2014, 21(6): 589-595. |
[4] |
Hui-ning ZHANG,Jian-li LI,An-jun XU,Qi-xing YANG,Dong-feng HE,Nai-yuan TIAN. Carbothermic Reduction of Zinc and Iron Oxides in Electric Arc Furnace Dust[J]. Chinese Journal of Iron and Steel, 2014, 21(4): 427-432. |
[5] |
HE Chun-lai,ZHU Rong,DONG Kai,QIU Yong-quan,SUN Kai-ming. Modeling of an Impinging Oxygen Jet on Molten Bath Surface in 150 t EAF[J]. Chinese Journal of Iron and Steel, 2011, 18(9): 13-20. |
[6] |
smail Ekmeki;Ya?瘙塂ar Yetisken;nal amdali. Mass Balance Modeling for Electric Arc Furnace and Ladle Furnace System in Steelmaking Facility in Turkey[J]. Chinese Journal of Iron and Steel, 2007, 14(5): 1-0. |
|
|
|
|