|
|
|
| Microstructural evolution and constitutive models of 9CrMoCoB heatresistant steel during high-temperature deformation |
| Chao-hang Jia1, Chen-xi Liu1, Yong-chang Liu1, Chong Li1, Hui-jun Li1 |
| 1 Key Lab of Hydraulic Engineering Simulation and Safety, School of Materials Science and Engineering, Tianjin University, Tianjin 300354, China |
|
|
|
|
Abstract In order to research the hot deformation behavior of 9CrMoCoB heat-resistant steel, hot compression tests were performed over a wide range of temperatures from 850 to 1150 C and strain rates from 0.01 to 10.00 s-1. The flow stress appears to increase with the decrease in deformation temperature and the increase in strain rate. The relationship between microstructural evolution and deformation parameters was studied, indicating that both low strain rate and high deformation temperature appear to promote the dynamic recrystallization, while excessively high temperature with low strain rate would result in the high non-uniformity of grain size. The experimental stress–strain data was applied to calculate the material constants involved in the Arrhenius-type constitutive model and the modified Zerilli-Armstrong (MZA) model, and feasibility of these two models was evaluated. The results show that the MZA model is more accurate to predict the high-temperature flow behavior of the experimental steel than the Arrhenius-type constitutive equation.
|
|
|
|
|
|
| Cite this article: |
|
Chao-hang Jia,Chen-xi Liu,Yong-chang Liu, et al. Microstructural evolution and constitutive models of 9CrMoCoB heatresistant steel during high-temperature deformation[J]. Journal of Iron and Steel Research International, 2019, 26(11): 1228-1239.
|
|
|
|
| [1] |
LI Kaiqiang,YANG Yinhui,QIAN Hao,CAO Jianchun. 03Cr18NiMoN lownickel duplex stainless steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(6): 563-572. |
| [2] |
Hou-long Liu, Ming-yu Ma, Ling-ling Liu, Liang-liang Wei, Li-qing Chen. Effect of W addition on hot deformation and precipitation behaviors of 19Cr2Mo ferritic stainless steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(5): 425-434. |
| [3] |
Yan-sen Hao, Jian Li, Wan-chun Liu, Wei-na Zhang, Zhen-yu Liu. On microstructure characterization of Fe–Cr–Ni–Mo–N super-austenitic stainless steel during hot deformation[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(10): 1080-1087. |
| [4] |
Zhi-qiang Yang . Zheng-dong Liu . Xi-kou He . Shi-bin Qiao . Chang-sheng Xie ,. ConstitutivemodelingandcriticalstrainofdynamicrecrystallizationinSA508Gr.4Nsteelforadvancedpressurevesselmaterials[J]. , 2018, 25(11): 1189-1197. |
| [5] |
Peng-tao Liu,, ? Qing-xue Huang,, ? Li-feng Ma, ? Tao Wang. Characterization of hot deformation behavior of wear-resistant steel BTW1 using processing maps and constitutive equations[J]. , 2018, 25(10): 1054-1061. |
| [6] |
Zong-ye Ding,Di Zhang,Qiao-dan Hu,,*,Long Zeng,Jian-guo Li,. Constitutive analysis and optimization on hot working parameters of as-cast high Cr ultra-super-critical rotor steel with columnar grains[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 916-924. |
|
|
|
|
2019, Vol. 26 
