|
|
Parameter study of sinter waste heat recovery in vertical tank based on energy and exergy analysis |
Jun-sheng Feng1, Sheng Zhang2, Hui Dong2, Gang Pei3 |
1 School of Environment and Energy Engineering, Anhui Jianzhu University, Hefei 230026, Anhui, China
2 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China
3 Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230026, Anhui, China |
|
|
Abstract The parameter study of sinter waste heat recovery in vertical tank was conducted numerically by using energy and exergy analysis, and the experimental data obtained from a homemade experimental apparatus was applied to verify the reliability of numerical model. Based on the first and second laws of thermodynamics, the effects of flow rate of cooling air (FRCA) and inlet temperature of cooling air (ITCA), as well as the inner diameter of cooling section (IDCS) and height of cooling section (HCS), on the sinter cooling process were analyzed in detail. The results show that the average deviation between the experimental data and calculation values is 4.93%, and the model reliability is verified. The enthalpy exergy of outlet air tends to increase first and then decrease with increasing the FRCA and ITCA, while increasing the IDCS only leads to the increase in enthalpy exergy of outlet air. For a given operational condition, the enthalpy exergy of outlet air can reach a maximum value with increasing the HCS. The vertical tank could obtain the maximum enthalpy exergy of outlet air through the adjustments of FRCA and ITCA, as well as the HCS.
|
Received: 17 September 2018
Published: 25 January 2020
|
|
|
|
Cite this article: |
Jun-sheng Feng,Sheng Zhang,Hui Dong, et al. Parameter study of sinter waste heat recovery in vertical tank based on energy and exergy analysis[J]. Journal of Iron and Steel Research International, 2020, 27(1): 22-32.
|
|
|
|
[1] |
He‑ping Li, Sheng‑li Wu, Zhi‑bin Hong, Heng Zhou, Ming‑yin Kou. null[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(6): 617-623. |
[2] |
Wei Wang, Xu‑heng Chen, Run‑sheng Xu, Jun Li, Wen‑jun Shen, Su‑ping Wang. Research progress on multiscale structural characteristics and characterization methods of iron ore sinter[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(4): 367-379. |
[3] |
Jun-sheng Feng, Guang-tao Gao, Yousef N. Dabwan, Gang Pei, Hui Dong. Thermal performance evaluation of subcritical organic Rankine cycle for waste heat recovery from sinter annular cooler[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(3): 248-258. |
[4] |
An-hua Li, Long-long Xi, Hai-bo Feng, Ning Zou, Min Tan, Ming-gang Zhu, Wei Li. Development of Ce-based sintered magnets: review and prospect[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(1): 1-11. |
[5] |
Dong-hui Liu, Jun-hua Li, Yue Peng, Jian-liang Zhang, Guang-wei Wang, Xun Xue. Comprehensive evaluation of sintering basic characteristics of iron ore based on grey relational analysis[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(7): 691-696. |
[6] |
Xiao-hui Fan, Yan-nan Wang, Min Gan, Zhi-yun Ji, Yang Zhou, Xu-ling Chen. Thermodynamic analysis and reaction behaviors of alkali metal elements during iron ore sintering[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(6): 558-566. |
|
|
|
|