|
|
|
| Thermal performance evaluation of subcritical organic Rankine cycle for waste heat recovery from sinter annular cooler |
| Jun-sheng Feng1, Guang-tao Gao2, Yousef N. Dabwan2, Gang Pei2, Hui Dong3 |
| 1 School of Environment and Energy Engineering, Anhui Jianzhu University, Hefei 230026, Anhui, China; 2 School of Engineering and Science, University of Science and Technology of China, Hefei 230026, Anhui, China; 3 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China |
|
|
|
|
Abstract The sinter cooling flue gas expelled from the end of an annular cooler was taken as the heat source of an organic Rankine cycle (ORC) system, and R123, R245fa, R600, R601 and R601a were selected as the working fluids of the ORC system. The effects of evaporation temperature and superheat degree of working fluid, as well as the pinch point temperature difference in the evaporator on the system thermal performance, were analyzed in detail. The results show that the system net output power and exergy efficiency for different working fluids first increase and then decrease with an increase in the evaporation temperature and decrease with an increase in the superheat degree and pinch point temperature difference. The change in pinch point temperature difference has no effect on the system thermal efficiency. For a given operational condition, the system thermal efficiency and exergy efficiency of R123 are the maximum, while the system total irreversible loss of R245fa is the maximum. When the evaporation temperature is greater than 110 °C, the system net output power of R600 is the maximum. The ORC system could obtain the maximum net output power and exergy efficiency through the adjustment of evaporation temperature of working fluid.
|
|
|
|
|
|
| Cite this article: |
|
Jun-sheng Feng,Guang-tao Gao,Yousef N. Dabwan, et al. Thermal performance evaluation of subcritical organic Rankine cycle for waste heat recovery from sinter annular cooler[J]. Journal of Iron and Steel Research International, 2020, 27(3): 248-258.
|
|
|
|
| [1] |
An-hua Li, Long-long Xi, Hai-bo Feng, Ning Zou, Min Tan, Ming-gang Zhu, Wei Li. Development of Ce-based sintered magnets: review and prospect[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(1): 1-11. |
| [2] |
Jun-sheng Feng, Sheng Zhang, Hui Dong, Gang Pei. Parameter study of sinter waste heat recovery in vertical tank based on energy and exergy analysis[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(1): 22-32. |
| [3] |
Dong-hui Liu, Jun-hua Li, Yue Peng, Jian-liang Zhang, Guang-wei Wang, Xun Xue. Comprehensive evaluation of sintering basic characteristics of iron ore based on grey relational analysis[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(7): 691-696. |
| [4] |
Xiao-hui Fan, Yan-nan Wang, Min Gan, Zhi-yun Ji, Yang Zhou, Xu-ling Chen. Thermodynamic analysis and reaction behaviors of alkali metal elements during iron ore sintering[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(6): 558-566. |
| [5] |
Zheng-wei Yu, Li-xin Qian, Hong-ming Long, Yi-fan Wang, Qing-min Meng, Tie-jun Chun. Determination method of high-temperature characteristics of iron-ore sintering based on n(Fe2O3)/n(CaO)[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(12): 1257-1264. |
| [6] |
Hong-song Han, Feng-man Shen, Xin Jiang, Chuan-guang Bi, Hai-yan Zheng, Qiang-jian Gao. Fundamental mechanism of effects of MgO on sinter strength[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(11): 1171-1177. |
|
|
|
|
2020, Vol. 27 
