|
|
|
| Analysis of operational parameters affecting denitrification rate of sintering flue gas in cross-flow activated coke purification facility |
| Wei-li Zhang1, Sheng-li Wu1, Zhong-jie Hu1,2 |
1 School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
2 Baoshan Iron and Steel Co., Ltd., Shanghai 201999, China |
|
|
|
|
Abstract The denitrification rate of the cross-flow activated coke flue gas purification facility varies with operational parameters. According to the simulated experiments, the denitrification rate with the height drop of the denitrification unit experiences 100%, rapid decreasing, and gradual rising to the equilibrium. According to the correlation analysis results based on production data, several operational parameters affecting the denitrification rate have been obtained. The denitrification rate has negative relationships with the activated coke bed temperature, the flue gas flow, the H2O content, the SO2 content and the NH3 slip, and has positive relationships with the O2 content, the NOx content, the NH3–NOx molar ratio, the flue gas pressure and the regeneration temperature. Properly increasing the sintering air leakage or the cooling air added into flue gas is beneficial to increase the denitrification rate. Priority should be given to O2, NH3–NOx molar ratio and flue gas flow to improve the denitrification rate. Additionally, a linear model, which had been validated, was developed and can be used to predict and control the denitrification rate.
|
|
Received: 09 July 2019
Published: 25 August 2020
|
|
|
|
| Cite this article: |
|
Wei-li Zhang,Sheng-li Wu,Zhong-jie Hu. Analysis of operational parameters affecting denitrification rate of sintering flue gas in cross-flow activated coke purification facility[J]. Journal of Iron and Steel Research International, 2020, 27(8): 887-897.
|
|
|
|
| [1] |
Bin Luo Hong-xian Shen Lin Lin Hai-chao Li Da-wei Xing Jian-fei Sun. Mechanical property statistical analysis of Gd50Al30Co20 amorphous wires for providing reference to design requirements of cooling system[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2018, 25(3): 261-267. |
| [2] |
Shan Ren*,Fu-qiang Guo,Qi Zhao,Jie Yang,Lu Yao,Ming Kong. Sintering flue gas desulfurization with different carbon materials modified by microwave irradiation[J]. Chinese Journal of Iron and Steel, 2017, 24(10): 979-984. |
|
|
|
|
2020, Vol. 27 
