|
|
Effect of specimen gauge reduction on uniaxial tension properties of reinforcing steel |
A. Triwiyono1, A.L. Han2, A. Aryanto3, S. Tudjono2, B.S. Gan4 |
1 Civil Engineering Department, Gadjah Mada University, Sleman 55283, Yogyakarta, Indonesia
2 Civil Engineering Department, Diponegoro University, Tembalang 50275, Semarang, Indonesia
3 Civil Engineering Department, Bandung Institute of Technology, Coblong 40132, Bandung, Indonesia
4 Department of Architecture, College of Engineering, Nihon University, Koriyama 963-8642, Fukushima Prefecture, Japan |
|
|
Abstract The Standard Test Methods for Tension Testing of Metallic Materials (ASTM E8) mandates a specimen gauge reduction for obtaining the tensile properties of reinforcing steel bars. The standard outlines the specimen preparation requirements and methods to ensure that test results well represent the material properties. On the other hand, some codes differ regarding the approach to specimen preparation. They do not apply gauging, for both deformed and plain steel bars. Thus, the effect of specimen gauge reduction on the tensile properties of reinforcing steel bars was evaluated, and the interconnection of properties to the layer hardness was analysed. The experiment governed a range of deformed hot-rolled bar sizes, tested in tension using precision instruments. The Rockwell hardness test was implemented layerwise on the specimen’s cross section, and the hardness number (HRC) was measured as a function of the layer distance to the centre. A finite element model was constructed to study the stress concentrations induced by a constant indentation, simulating the HRCs, and to numerically construct the stress–strain relationship of ungauged steel bars based on the core properties and the section HRC relationship. Scanning electron microscopy readings were performed to visually and chemically justify the results. It was shown that the specimen gauge reduction significantly influenced the resulting stress–strain behaviour of the material, and the yield and ultimate strengths were reduced. It was also demonstrated that the hardness response is proportional to the distance to the specimen’s axes. The corresponding yield and ultimate strengths thus increased accordingly, from the inner to the outer layers of the bar. Testing a gauged specimen will therefore result in lower strength than that of an ungauged steel bar.
|
Received: 21 June 2019
Published: 25 August 2020
|
|
|
|
Cite this article: |
A. Triwiyono,A.L. Han,A. Aryanto, et al. Effect of specimen gauge reduction on uniaxial tension properties of reinforcing steel[J]. Journal of Iron and Steel Research International, 2020, 27(8): 964-971.
|
|
|
|
[1] |
Tao Wang1, Mei Zhang2,3, Ren‑dong Liu4, Liang Zhang1, Lin Lu1, Wen‑heng Wu1. Effect of welding speed on microstructure and mechanical properties of laser-welded transformation induced plasticity (TRIP) steels[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(9): 1087-1098. |
[2] |
Yang Cao, Chong Luo, Lin Zhao, Yun Peng, Liang Song, Cheng-yong Ma, Zhi-ling Tian, Min-lin Zhong, Yan-jie Wang. Microstructural evolution and mechanical properties of laser-welded joints of medium manganese steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(1): 75-87. |
[3] |
Bin Luo Hong-xian Shen Lin Lin Hai-chao Li Da-wei Xing Jian-fei Sun. Mechanical property statistical analysis of Gd50Al30Co20 amorphous wires for providing reference to design requirements of cooling system[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2018, 25(3): 261-267. |
[4] |
Hui Zheng, . Wei Li , . Yu Gong, . Li Wang . Xue-jun Jin,. Microstructure-based finite element modeling of effect of metastable austenite on mechanical properties of quenching and partitioning (Q&P) 980 steel[J]. , 2018, 25(11): 1140-1148. |
[5] |
Yu-jun Li,Huan Li,Peng Lan,Hai-yan Tang,Jia-quan Zhang*. Thermo-elasto-visco-plastic finite element analysis on formation and propagation of off-corner subsurface cracks in bloom continuous casting[J]. , 2017, 24(11): 1159-1167. |
[6] |
Zhen-xue Shi,Shi-zhong Liu,Xiao-dai Yue,Li-jie Hu,Wan-peng Yang,Xiao-guang Wang,Jia-rong Li. Effect of cellular recrystallization on tensile properties of a nickel-based single crystal superalloy containing Re and Ru[J]. Chinese Journal of Iron and Steel, 2017, 24(10): 1059-1064. |
|
|
|
|