|
|
|
| Experimental research on semi-coke for blast furnace injection |
| Chun‑chao Huang1,2, Xiao‑jun Ning1,3, Guang‑wei Wang1,2, Jian‑liang Zhang1,2, Zheng‑fu Peng1,2, Hai‑peng Teng1,2 |
| 1 State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China; 2 School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China; 3 Guanzhuang Campus, University of Science and Technology Beijing, Beijing 100083, China |
|
|
|
|
Abstract The combustion properties and grindability of Shenmu low-rank coal (SM) and its four different semi-cokes were studied by the self-designed equipment and Hardgrove method. The four semi-cokes were obtained under the pyrolysis temperature of 400, 500, 600 and 700 °C, named as SM-400, SM-500, SM-600 and SM-700, respectively. The analyses of nitrogen adsorption, Fourier-transform infrared spectroscopy (FTIR) spectra and Raman spectra were carried out to explain the change in combustion ratio and grindability. The result showed that the specific surface area of samples had an essential effect on the combustion ratio of SM-400 and SM-500. Meanwhile, the grindability depended on the strength of coal matrix, and the augment of pore amounts would increase the grindability. The functional groups and graphitization degree of the same sample were identical with the combustion ratio. With the pyrolysis upgrading temperature increasing, the combustion ratio of sample decreased, corresponding to the decrease in the benzene ring and the increase in graphitization degree. In addition, the thermogravimetric analysis was carried out, and the result was compared against what was shown in the data of combustion ratio. For pulverized coal injection, the combustion ratio was more intuitive and more accurate than combustibility.
|
|
|
|
|
|
| Cite this article: |
|
Chun‑chao Huang,Xiao‑jun Ning,Guang‑wei Wang, et al. Experimental research on semi-coke for blast furnace injection[J]. Journal of Iron and Steel Research International, 2021, 28(4): 391-401.
|
|
|
|
| [1] |
Ri-jin Cheng, Hua Zhang, Yang Li, Qing Fang, Bao Wang, Hong-wei Ni. Effect of process parameters on dry centrifugal granulation of molten slag by a rotary disk atomizer[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(03): 263-271. |
| [2] |
ZHANG Jian-liang,REN Shan,SU Bu-xin,LIN Yin-he,LONG Shi-gang. Combustion Ratio of Waste Tire Particle, PC and Mixture at Blast Temperature of BF[J]. Chinese Journal of Iron and Steel, 2012, 19(2): 12-16. |
|
|
|
|
2021, Vol. 28 
