|
|
|
| Bubble behavior in cylindrical and square vessels under centric mechanical stirring |
| Kun Wang1, Yan Liu1, Masamichi Sano2, Ting-an Zhang1 |
| 1 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China; 2 Department of Materials Processing Engineering, Nagoya University, Nagoya 464-8601, Japan |
|
|
|
|
Abstract Water model experiments were carried out to investigate the bubble behavior in cylindrical and square vessels under centric mechanical stirring. The bubble behavior in the square vessel was investigated in detail by using a high-speed camera to record the transient images of the bubbles. An image analysis software was used to obtain the bubble diameter. The results showed that the centric mechanical stirring in the square vessel was suitable for breakage and dispersion of bubbles, but not suitable for that in the cylindrical vessel. Increasing the impeller blade length and impeller rotation speed was beneficial to disintegrate and disperse bubbles widely. The bubble diameter decreased with the increase in the Weber number and increased slightly with the increase in the modified Froude number. The dimensionless correlation equation of bubble diameter was obtained by the dimensional analysis method.
|
|
|
|
|
|
| Cite this article: |
|
Kun Wang,Yan Liu,Masamichi Sano, et al. Bubble behavior in cylindrical and square vessels under centric mechanical stirring[J]. Journal of Iron and Steel Research International, 2021, 28(10): 1243-1250.
|
|
|
|
| [1] |
Yan LIU,Zi-mu ZHANG,Sano MASAMICHI,Jun ZHANG,Pin SHAO,Ting-an ZHANG. Improvement of Impeller Blade Structure for Gas Injection Refining under Mechanical Stirring[J]. Chinese Journal of Iron and Steel, 2014, 21(2): 135-143. |
| [2] |
LIU Yan,ZHANG Zi-mu,LIU Jian-nan,ZHANG Jun-hua,Masamichi Sano,ZHANG Jun. Cold Model Study on Mg Desulfurization of Hot Metal Under Mechanical Stirring[J]. Chinese Journal of Iron and Steel, 2013, 20(12): 1-6. |
|
|
|
|
2021, Vol. 28 
