|
|
Effect of axial static magnetic field on cleanliness and microstructure in magnetically controlled electroslag remelted bearing steel |
Qiang Li1, Zhi-bin Xia1, Yi-feng Guo1, Zhe Shen1, Tian-xiang Zheng1, Biao Ding1, Yun-bo Zhong1 |
1 School of Materials Science and Engineering, State Key Laboratory of Advanced Special Steel, Shanghai Key Laboratory of Advanced Ferrometallurgy, Shanghai University, Shanghai 200444, China |
|
|
Abstract The effect of the axial static magnetic field (ASMF) on cleanliness and microstructure in magnetically controlled elec- troslag remelted GCr15 bearing steel ingots was investigated experimentally. The results show that a magnetically con- trolled spin-vibration induced by the interaction of the ASMFs and the remelting current exists at the consumable electrode tip, resulting in thinner liquid melt film and smaller droplets. With the increase in magnetic flux density, the optimization effect of ASMFs on electroslag remelting process increases and reaches the peak with a 40 mT ASMF, then decreases. The cleanliness of the ingots was improved, and the count of inclusions larger than 5 μm was reduced. The microstructure of the ingots processed with a 40 mT ASMF was significantly refined. The depth of the metallic molten pool was reduced from 45.2 to 17.5 mm with the application of 40 mT ASMF. The tensile strength, impact toughness, and Rockwell hardness of the ingots obtained under the 40 mT ASMF were significantly improved. The mechanisms of the spin-vibration occurring at the electrode tip end were interpreted in detail to elucidate the effect of ASMFs.
|
Received: 07 March 2021
Published: 25 December 2021
|
|
|
|
Cite this article: |
Qiang Li,Zhi-bin Xia,Yi-feng Guo, et al. Effect of axial static magnetic field on cleanliness and microstructure in magnetically controlled electroslag remelted bearing steel[J]. Journal of Iron and Steel Research International, 2021, 28(12): 1562-1573.
|
|
|
|
[1] |
LUO Teng-fei, WANG Wei-ling, LIU Zong-hui, LUO Sen, ZHU Miao-yong. In-situ observation on solidification of GCr15 bearing steel at cooling rates of continuous casting[J]. Iron and Steel, 2022, 57(2): 73-84. |
[2] |
WANG De-yong, QUAN Qi, QU Tian-peng, ZHOU Xing-zhi, LI Xiang-long, CHEN Gang. Physical modeling on unsteady flow behavior of molten steel in single strand tundish[J]. CONTINUOUS CASTING, 2021, 46(5): 60-68. |
[3] |
ZENG Yao-xian. Cleanness control of sulfur bearing gear steel 20CrMnTiH[J]. Iron and Steel, 2021, 56(2): 76-81. |
[4] |
GUO Jing, CHEN Xing-run, HAN Shao-wei, YAN Yan, GUO Han-jie. Theory and industrial applications for improvement of ultra-thin stainless steel strip purity and inclusion plasticity by development of "two step slagging strategy"[J]. Iron and Steel, 2021, 56(12): 43-51. |
[5] |
SONG Zhao-qi, LIU Wei, YANG Shu-feng, LI Jing-she, CHEN Yong-feng, ZUO Xiao-tan. Formation reason and control of Ds inclusions in QD08 steel[J]. Iron and Steel, 2021, 56(12): 68-74. |
[6] |
ZHANG Xueliang1,2, TAO Yu1,2, QU Jinglong1,2, YANG Shufeng3, GU Yu1,2. A review of systematic analysis of superalloy cleanliness[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2021, 33(12): 1219-1227. |
|
|
|
|