|
|
Effect of vertical electromagnetic stirring on solute distribution in billet continuous casting process |
Tao Wang1,2,3, En-gang Wang1,3, Yves Delannoy4, Yves Fautrelle2, Olga Budenkova2 |
1 Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110004, Liaoning, China; 2 CNRS, Grenoble INP, SIMAP, Universite′ Grenoble Alpes, Grenoble 38000, France; 3 School of Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China; 4 CNRS, Grenoble INP, LEGI, Universite′ Grenoble Alpes, Grenoble 38000, France |
|
|
Abstract A volume averaged columnar solidification model, which couples the flow, temperature and solute concentration fields, is applied to simulate experimental continuous casting cases with and without vertical electromagnetic stirring (V-EMS). The calculated distribution of magnetic induction intensity and final macrosegregation maps are consistent with the experimental results. Calculation results reveal that the V-EMS promotes longitudinal melt flow, accelerates heat dissipation and solidification and finally reduces the central segregation of carbon. However, when V-EMS is applied, the solute distribution becomes asymmetric because the melt flow shows opposite directions between the near and far sides from stirrer. An obvious positive segregation band is observed at about 1/4 width of the billet near the stirrer in both calculated and experimental results. The position and degree of such positive segregation could be affected by installation height of stirrer, as demonstrated by additional simulation cases.
|
|
|
|
|
Cite this article: |
Tao Wang,En-gang Wang,Yves Delannoy, et al. Effect of vertical electromagnetic stirring on solute distribution in billet continuous casting process[J]. Journal of Iron and Steel Research International, 2022, 29(01): 132-143.
|
|
|
|
[1] |
Yan-bin Yin, Jiong-ming Zhang. Large eddy simulation of transient transport and entrapment of particle during slab continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(2): 247-262. |
[2] |
Pei Xu, Yong-zhi Zhou, Deng-fu Chen, Mu-jun Long, Hua-mei Duan. Optimization of submerged entry nozzle parameters for ultra-high casting speed continuous casting mold of billet[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(01): 44-52. |
[3] |
Daniel Christopher Merten, Marc-Thorsten Hutt, Yilmaz Uygun. Effect of slab width on choice of appropriate casting speed in steel production[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(01): 71-79. |
[4] |
Alexander Vakhrushev, Abdellah Kharicha, Menghuai Wu, Andreas Ludwig, Gerald Nitzl, Yong Tang, Gernot Hackl, Josef Watzinger, Christian M. G. Rodrigues. Norton-Hoff model for deformation of growing solid shell of thin slab casting in funnel-shape mold[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(01): 88-102. |
[5] |
Da-wei Liu, Chen Lv, Jin-ming Zhang, Xin Jin. Elastodynamic analysis of synergistic oscillation system driven by double servomotors for continuous casting mold[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(01): 115-123. |
[6] |
Dong-bin Jiang, Li-feng Zhang, Ya-dong Wang. Effect of mold electromagnetic stirring on solidification structure and solute segregation in continuous casting bloom[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(01): 124-131. |
|
|
|
|