|
|
|
| Cold compression deformation method for reducing residual stress and uniformizing micro-property in ferrite steel |
| Bo Ning1, Hui-bin Wu1,2, Gang Niu1, Xin-pan Yu1 |
1 Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing 100083, China
2 Beijing Laboratory of Metallic Materials and Processing for Modern Transportation, University of Science and Technology Beijing, Beijing 100083, China |
|
|
|
|
Abstract To reduce internal residual stress and homogenize micro-property of hot-rolled ferrite steel, the cold compression deformation method with small reduction rate has been performed in the hot-rolled samples, and X-ray diffraction and nanoindentation test have been used to detect the residual stress and micro-property. The samples with deformation rate of 0–5.59% or annealing at 550 °C are analyzed. The results show that, due to the coupling effect of thermal expansion and cold contraction and the volume expansion of microstructural transformation from austenite to ferrite, compressive residual stress was found inside the hot-rolled samples. With the increase in cold compression deformation, the dislocation density increased and the microhardness increased gradually, and there is no obvious rule for the change of mean nano-hardness in micro-zone for the center of samples. However, the uniformity of nano-hardness in the micro-zone increased first and then decreased, and the value of residual stress has obvious corresponding relationship with the uniformity of micro-zone property. The cold compression deformation with appropriate reduction rate can reduce residual stress and improve nanohardness uniformity of the hot-rolled samples, but more deformation (such as reduction rate ε = 5.59%) makes residual stress increase and makes uniformity of nano-hardness deteriorate.
|
|
Received: 02 September 2020
Published: 25 March 2022
|
|
|
|
| Cite this article: |
|
Bo Ning,Hui-bin Wu,Gang Niu, et al. Cold compression deformation method for reducing residual stress and uniformizing micro-property in ferrite steel[J]. Journal of Iron and Steel Research International, 2022, 29(3): 503-511.
|
|
|
|
| [1] |
Jian-tao Ju, Chen-mei Tang, Guang-heng Ji, Xiang-dong Xing, Gui-qing Zhao, Xin-tai Jiang, Feng-lin Lu. Effect of BaSO4 on phase composition and sintering process of iron ore fines[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(3): 408-417. |
| [2] |
Xin-bo Ji, Si-xin Zhao, Li-ming Fu, Jian Peng, Jia-qiang Gao, Da-jiang Yu, Zong-ze Huang, Ai-dang Shan. High cycle rotating bending fatigue performance and fracture behavior in a pearlite–ferrite dual-phase steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(3): 519-528. |
| [3] |
Guang-hui Zhao, Jian Zhang, Juan Li, Hua-ying Li, Hai-tao Liu, Li-feng Ma. Effect of copper on edge cracking behavior and microstructure of rolled austenitic stainless steel plate[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(2): 281-294. |
| [4] |
Fan Zhao, Guo-ning He, Ya-zheng Liu, Zhi-hao Zhang, Jian-xin Xie. Effect of titanium microalloying on microstructure and mechanical properties of vanadium microalloyed steels for hot forging[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(2): 295-306. |
| [5] |
Shuai Xu, Shao-hua Li, Shui-ze Wang, Jun-heng Gao, Rui Cao, Qing-xiao Feng, Hua-long Li, Xin-ping Mao. Research status and prospect of direct strip casting manufactured lowcarbon microalloyed steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(01): 17-33. |
| [6] |
Zheng-hai Zhu, Li Zhou, Fei He, Xiao-fang Shi, Li-zhong Chang, Hai-jun Wang, Hong-biao Dong. Effect of electropulsing on austenite to ferrite transformation in low carbon steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(4): 437-444. |
|
|
|
|
2022, Vol. 29 
